$985.50
Out of stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Maxim Defense built its name on hard-use gear, and the DS-D 7.62 carries that reputation into a direct thread 30 cal can that does not flinch under abuse. It is the smart-money sibling of the highly regarded DSX line, sharing the same M-Kore internal design that made the DSX a standout for sound suppression and low gas blowback. The big difference is the tube material. Maxim went with Grade 9 titanium here instead of the pricier Grade 5, which keeps the can light and tough without paying for strength you will never use on a 10.3 inch or longer barrel.
The monolithic 17-4 stainless steel core is the heart of this suppressor, knocking down sound and flash while keeping gas blowback and cyclic rate gain noticeably lower than traditional baffle stacks. That means less crud blowing back at your face, a softer shooting rifle, and a gas system that stays closer to its unsuppressed behavior. The core even has integrated carbon cutters that scrape fouling as you shoot, which makes cleanup far less of a chore. At 8 inches long with a 1.75 inch outer diameter, it balances well on everything from a 300 Blackout carbine to a full-size 308 bolt gun.
This is a full auto rated suppressor, so a long day of fast strings on a semi-auto will not even warm up its limits. Maxim recommends it for barrels 10.3 inches and up, and within that lane it will take about any pace you can feed it. The 5/8-24 direct thread mount keeps things simple with no proprietary muzzle devices to buy, and the Cerakote and DLC finish shrugs off carbon, weather, and holster-bag rash. Made in the USA and backed by a company that supplies some seriously demanding customers, the DS-D 7.62 is a workhorse can that earns its spot on the end of your rifle.
They share the same core design and sound performance, so you are not giving up suppression by choosing the DS. The DS-D uses Grade 9 titanium for the tube instead of Grade 5 and skips the secondary tube retention ring. Grade 5 costs quite a bit more, and on barrels 10.3 inches and longer the extra strength simply is not needed.
Maxim optimizes the DS-D for barrels 10.3 inches and longer. Within that range it is full auto rated, so hard semi-auto use and rapid strings are well inside its comfort zone. If you plan to run very short barrels, the DSX line is the better pick since it is rated down to shorter lengths.
The 5/8-24 direct thread mount and 7.62mm bore cover the popular 30 caliber rifle rounds, including 308 Win, 7.62 NATO, and 300 Blackout. You can also run smaller bores like 6.5 Creedmoor through it since they share the same thread pitch, though a dedicated smaller-bore can will be a touch quieter for those. Just make sure your muzzle threads are clean and concentric before spinning it on.
Yes, that is one of the main reasons Maxim designed the M-Kore internals. The core keeps back pressure and cyclic rate gain low compared to traditional baffle designs, so an AR pattern rifle stays cleaner and softer shooting. The core also has built-in carbon cutters that help scrape fouling from the tube during normal use.
| UPC | 680017483753 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | MXM48375 |
| Caliber/Gauge | 7.62MM |
You must be logged in to post a review.
Reviews
There are no reviews yet.