Description
The Magpul Hunter 700L takes one of America's most iconic bolt guns and gives it a modern, dialed-in feel without any custom gunsmithing. It's built around a reinforced polymer shell wrapped over a Type III hard anodized A380 cast aluminum V-bedding block, which is the part doing the heavy lifting here. That block gives the action a solid, consistent seat and free floats compatible factory and aftermarket barrels up to a .920 diameter, so you get repeatable accuracy without paying to have the action bedded.
What Sets the Hunter 700L Apart
Fit is where this stock really earns its keep. The length of pull adjusts roughly 13 to 15 inches using included spacers, and the comb height is adjustable too. It ships with a 0.25 inch cheek riser installed, with taller risers available if you're running a scope mounted high. Add in the M-LOK slots along the forend sides and bottom and rear push-button QD sling compatibility, and you've got a rifle you can set up exactly how you like it, whether that's a bipod for the bench or a sling for the timber.
Fitting the Hunter 700L to Your Rifle
This is a true drop-in for standard Remington 700 pattern long action rifles running factory hinged floorplates. If you've got a blind-magazine ADL, you'll want to grab the Magpul Bolt Action Magazine Well 700L, which pops in after you pull the OEM bottom metal and converts the rifle to detachable AICS-spec magazines. It's worth noting that factory action screws vary in length, so have a longer set handy in case yours come up short during install. It won't fit Remington 700 DM models with their proprietary detachable mags.
Built to Get Beat On
The Flat Dark Earth finish looks clean, hides wear, and shrugs off weather, which is exactly what you want on a hunting or range rifle that lives outdoors. It's made in the USA and comes in around 3.2 pounds, striking a nice balance between rigidity and something you can carry all day. For anyone looking to breathe new life into a tired factory 700, this is one of the easiest upgrades you can make.
Key Specifications
- Manufacturer: Magpul Industries
- Manufacturer Part Number: MAG483-FDE
- UPC: 840815109792
- Model: Hunter 700L
- Fit: Remington 700 Long Action (right-hand)
- Action Type: Bolt Action
- Color / Finish: Flat Dark Earth
- Material: Reinforced polymer shell with Type III hard anodized A380 cast aluminum V-bedding block
- Barrel Clearance: Free floats profiles up to .920 diameter
- Length of Pull: Adjustable, approximately 13.0 to 15.0 in
- Comb Height: Adjustable (ships with 0.25 in riser)
- Accessory Mounting: M-LOK slots (forend sides and bottom), rear QD sling compatible
- Magazine Compatibility: Factory hinged floorplate; AICS-spec with optional Magpul 700L mag well
- Weight: Approx. 3.2 lb
- Country of Origin: Made in USA
What’s Included
- Magpul Hunter 700L stock (FDE)
- Installed 0.25 in cheek riser
- Length of pull spacers
Frequently Asked Questions
Will the Magpul Hunter 700L fit my Remington 700 if it doesn't have a hinged floorplate?
The Hunter 700L is designed around standard Remington 700 long action rifles with factory hinged floorplates. If you have a blind-magazine ADL model, you can still run this stock by adding the Magpul Bolt Action Magazine Well 700L, which drops in after removing the OEM bottom metal and converts the rifle to detachable AICS-spec magazines. Note that it is not compatible with Remington 700 DM models that use proprietary detachable magazines.
Is the Hunter 700L really a drop-in, or does it need bedding?
It's a genuine drop-in with no bedding required. The anodized aluminum V-bedding block seats the action consistently and free floats compatible barrels up to a .920 diameter right out of the box. One thing to keep in mind is that factory action screws vary in length, so it's smart to have a longer set on hand in case yours end up a touch short during installation.
Can I adjust the length of pull and cheek height on this stock?
Yes, both are adjustable so you can tailor the fit. Length of pull adjusts roughly 13 to 15 inches using the included spacers, and the comb height can be raised with cheek risers. It ships with a 0.25 inch riser installed, and taller options are available if you're running optics mounted higher.
Does the Magpul Hunter 700L come with a magazine or trigger guard?
No, this listing is for the stock only. It reuses your rifle's existing factory bottom metal and floorplate. If you want detachable box magazine capability, you'll need to pick up the Magpul Bolt Action Magazine Well 700L separately, which includes a magazine and trigger guard assembly.





Reviews
There are no reviews yet.