Description
The Lyman Series 17A Target Front Sight in the .584" high 17AUG version is one of those parts that quietly makes an older rifle shoot the way it was meant to. It's machined from a solid chunk of steel, finished in black, and built as the companion piece to a Lyman receiver sight, though folks pair it happily with Williams and Redfield peeps too. The globe body shades the front element to cut glare, which is a real help when you're shooting out in the open with no roof overhead. At .584", this is the tallest of the four heights in the lineup, so it's the one to grab when your setup or barrel taper calls for a higher front sight.
What the Series 17A Brings to the Range
The strength of this sight is the interchangeable insert system. It ships with eight inserts locked in place by a threaded cap, and you can swap them at the bench in seconds. The set covers two post inserts, a bead, and five aperture-style inserts in a range of hole sizes, so you can match your front element to the target, the light, and your eyes. Some target shooters run a fine post with a 6 o'clock hold, others center a bull inside an aperture ring. Having the options on hand means you're not stuck with one sight picture.
Fitting the 17AUG Front Sight
This one is cut for a standard 3/8" dovetail, which is about as universal as it gets on rimfire and lever rifles. Plenty of installs go in with a light snug fit right out of the box, and if it's a touch tight, a few passes with a jeweler's file and it presses right in. It's a common upgrade on rifles like Marlin lever guns, Savage rimfires, older Mossbergs, and single-shot target rifles.
Why the 17AUG Sight Holds Up
Because the whole body is machined from one piece of steel, there's nothing flimsy about it, and the finish keeps things clean and low-glare. If you ever want an even finer sight picture down the road, aftermarket insert cards from makers like Lee Shaver drop right into the 17-series globe, so this sight grows with you as your shooting sharpens up.
Key Specifications
- Manufacturer: Lyman
- Model: Series 17A (17AUG)
- Manufacturer Part Number: 3171080
- UPC: 011516310804
- Style: Target Globe Front Sight
- Sight Height: .584" (bottom of dovetail to center of aperture)
- Dovetail Fit: 3/8"
- Material: Machined solid steel
- Finish / Color: Black
- Inserts Included: 8 interchangeable inserts, threaded cap retention
- Shipping Weight: Approx. 1 oz
What’s Included
- Lyman Series 17A (17AUG) .584" target front sight body
- Eight interchangeable inserts (two posts, one bead, five aperture-type)
- Threaded retaining cap
Frequently Asked Questions
Which inserts come with the Lyman 17A front sight?
It comes with eight inserts total. That breaks down to two post-type inserts (.050 and .100 wide), one .062 bead insert, and five aperture-type inserts, which include one plastic insert with a .120 hole and four steel inserts in .093, .102, .110 and .120 hole sizes. They swap in and out under a threaded cap, so you can change your sight picture right at the bench.
Will the 17AUG fit my rifle's dovetail?
This sight is cut for a standard 3/8" dovetail slot, which is common on a lot of rimfire, lever, and single-shot rifles. Many installs go in with a snug fit, and if it's a little tight, a few light passes with a jeweler's file usually lets it press right in. If your rifle uses a different dovetail size, you'll want to confirm before ordering.
How do I pick the right height in the Series 17A lineup?
The 17A comes in four heights, and this 17AUG is the tallest at .584", measured from the bottom of the dovetail to the center of the aperture. Taller front sights suit certain barrel tapers and receiver-sight setups, so the best choice depends on the rifle and the rear peep you're running. If you're swapping a factory sight, matching or going up in height is the usual move to get your point of impact where you want it.
Can I upgrade the inserts later?
Yes. The 17-series globe accepts aftermarket insert cards from makers like Lee Shaver, which offer finer posts, crosshairs, and apertures than the factory set. Shooters chasing tighter groups often go this route once they've settled on a sight picture they like.





Reviews
There are no reviews yet.