Description
If you handload 6.5 Creedmoor and chase tight groups at distance, bullet seating depth is one of those details that separates "good enough" from genuinely precise. The Lyman Pro Micrometer Seating Die gives you that control. The micrometer-adjustable seating head lets you change seating depth in exact, repeatable increments, so when you find the sweet spot for a particular bullet and barrel, you can come back to it anytime without guesswork or endless trial-and-error measuring.
What the Lyman Pro Micrometer Seater Does on the Bench
The heart of this die is the floating bullet seating punch. It self-centers the bullet on the case mouth as the ram comes up, which keeps everything in line and cuts down on runout. Less runout means your bullet sits truer to the bore, and that consistency shows up on paper. Dial the micrometer head a few thousandths one way or the other and you can fine-tune jump to the lands or work up a load with real confidence that each adjustment is exactly where you set it.
Built for the Long Haul
This 6.5 Creedmoor die is machined from corrosion-resistant stainless steel, so it shrugs off rust and keeps working trip after trip to the range. Lyman designed the Pro Die line with progressive and automated setups in mind, and it uses the industry-standard 7/8-14 bottom thread, which means it drops right into Lyman, Mark 7, and essentially any modern reloading press that takes standard dies. Whether you run a single-stage for load development or a progressive for volume, it fits.
Who Gets the Most Out of It
Precision rifle folks, long-range target shooters, and anyone serious about repeatable 6.5 Creedmoor loads will appreciate what this seater brings to the bench. It's a seating-only die, so pair it with a sizing die to round out your setup. For reloaders who want their ammo to shoot the same today as it did last month, this is the kind of tool that earns its keep.
Key Specifications
- Manufacturer: Lyman
- Caliber: 6.5 Creedmoor
- Die Type: Micrometer Bullet Seating Die
- Material: Corrosion-Resistant Stainless Steel
- Seating Adjustment: Micrometer-Adjustable Head
- Seating Stem: Floating Bullet Seating Punch
- Thread Size: 7/8-14
- Press Compatibility: Lyman, Mark 7, and standard presses
- Color: Silver / Stainless
- Manufacturer Part Number: 7704430
- UPC: 011516744302
- Shipping Weight: 0.725 lb
What’s Included
- Lyman Pro Micrometer Seating Die (6.5 Creedmoor)
- Die lock ring
- Hex wrench
Frequently Asked Questions
Does the Lyman Pro Micrometer Seating Die fit standard reloading presses?
Yes. It uses the industry-standard 7/8-14 bottom thread, so it threads into Lyman, Mark 7, and virtually any modern press that accepts standard dies, including brands like RCBS and Lee. Lyman built the Pro Die line specifically with both progressive and automated setups in mind, though it works just as well on a single-stage.
Does this die size brass or only seat bullets?
This is a dedicated seating die, not a sizing die. It handles bullet seating with its micrometer-adjustable head and floating seating punch. You'll want to pair it with a sizing die to complete your 6.5 Creedmoor reloading process.
How does the micrometer head help with accuracy?
The micrometer-adjustable head lets you change seating depth in precise, repeatable thousandths of an inch. Once you find the seating depth that shoots best in your rifle, you can return to that exact setting anytime without re-measuring. Combined with the floating stem that centers the bullet to reduce runout, it helps produce consistent, true-sitting rounds.
Does the Lyman Pro Micrometer Seating Die crimp?
No, this die is engineered strictly for precise bullet seating without crimping. If you want to add a crimp to your 6.5 Creedmoor loads, you'd use a separate taper or roll crimp die. Keeping seating and crimping as separate steps is a common approach for reloaders focused on precision.




Reviews
There are no reviews yet.