Description
Lyman pretty much wrote the book on carbide pistol dies, and this four-die set for .40 S&W and 10mm Auto is a great example of why so many reloaders keep coming back to them. The big draw with carbide is simple: the tungsten carbide sizing ring lets you skip case lube altogether, which means less mess and faster throughput when you're cranking out a few hundred rounds in an afternoon. Both .40 S&W and 10mm share the same case diameter, so one set handles both cartridges without swapping anything out.
What Sets the Lyman Carbide 4-Die Set Apart
The fourth die is the real reason to reach for this one over a standard three-die kit. It adds a separate taper crimp die, which is exactly what you want for rounds that headspace on the case mouth like these two do. Keeping the crimp as its own step lets you dial in just enough tension to hold the bullet without biting into the brass and throwing off your headspace. That separation between seating and crimping is a small thing that makes a real difference in how your loaded rounds chamber and shoot.
The Two-Step M Die at Work
Lyman's two-step neck expander, the M die, is a favorite among folks who load cast and jacketed bullets. The first step opens the case neck to just under bullet diameter for proper neck tension, and the second step flares the mouth slightly so the bullet starts perfectly centered instead of getting shaved or tipped. It does this without stretching the brass the way an old-school expander button can, which helps case life over the long haul. If you shoot a lot of cast lead through your 10mm or .40, this die alone earns its keep.
Built for the Long Run
The set includes a one-piece hardened steel decapping rod and extra seating screws to match up with different bullet nose shapes. Everything threads 7/8-14, so it drops into virtually any press, including progressives from Dillon and the rest. All four dies tuck into a sturdy plastic storage box so they stay organized and protected between sessions on the bench.
Key Specifications
- Manufacturer: Lyman
- Manufacturer Part Number: 7680207
- UPC: 011516702074
- Caliber: .40 S&W / 10mm Auto
- Die Count: 4-Die Set
- Sizing Die Material: Tungsten Carbide
- Die Type: Pistol / Full Length
- Thread Size: 7/8-14
- Press Compatibility: Single stage, turret, and progressive presses
- Country of Origin: USA
- Shipping Weight: 2.16 lbs
What’s Included
- Full-length carbide sizing die
- Two-step neck expander (M) die
- Bullet seating die
- Taper crimp die
- One-piece hardened steel decapping rod
- Extra seating screws for various bullet nose shapes
- Plastic storage box
Frequently Asked Questions
Do I need case lube with the Lyman Carbide 4-Die Set?
No, and that's one of the best parts. The tungsten carbide sizing ring means you can size .40 S&W and 10mm brass without applying any case lube, which cuts out a messy step and speeds up high-volume sessions. Just keep in mind that carbide is for straight-walled pistol cases like these.
Will this set work on my progressive press?
Yes. The dies use the standard 7/8-14 thread, so they fit virtually any reloading press, including progressives from Dillon and other popular brands. Many reloaders run these in a progressive setup specifically because the carbide sizer lets them skip lube and keep the handle moving.
What does the fourth die do compared to a three-die set?
The fourth die is a dedicated taper crimp die. Since both .40 S&W and 10mm Auto headspace on the case mouth, a taper crimp lets you set just the right bullet tension without rolling the case mouth over, which keeps your rounds chambering reliably. Separating the crimp from the seating step also gives you finer control over both.
Is the M neck expander die good for cast bullets?
It's a strong choice for cast and jacketed bullets alike. The two-step expander opens the neck to just under bullet diameter, then adds a slight flare so the bullet starts centered without shaving lead or deforming. Reloaders who shoot a lot of cast consistently point to the M die as a reason to buy this set.





Reviews
There are no reviews yet.