Description
If you cast or shoot .44 caliber lead bullets and you're chasing higher velocities without gunking up your bore, these Lyman Gas Checks are the little component that makes it happen. They're small copper gilding metal cups that crimp onto the rebated base of a gas-check-style bullet, shielding that soft lead from the hot, fast-moving powder gases that would otherwise cut past the base and leave lead streaks down your barrel. This box gives you 1,000 of them, so you're set for a whole lot of loading sessions.
Why Cast .44 Shooters Reach for Lyman Gas Checks
The common rule of thumb around cast bullets is that once you start pushing past roughly 1,400 to 1,500 fps, plain-base bullets tend to lead the bore. That's exactly where a gas check earns its keep. By sealing the base, these checks cut down on gas cutting so your barrel stays cleaner and your groups stay tighter, which is a big deal if you're loading warm .44 Magnum for hunting or heavy revolver and lever-gun work. Load development also tends to be more forgiving with a checked bullet, since you've got more room before leading creeps in.
Getting the Most From These .44 Gas Checks
These are a crimp-on design, which means they seat and lock on cleanly during the sizing step in a lubricator-sizer like a Lyman 450 or 4500. One thing worth remembering: gas checks only work on bullet molds designed with a gas-check base and reduced shank. If your mold casts a plain-base bullet, these won't grab on the way they should. Match the check to a proper .44 gas-check bullet and you'll get square, consistent seating every time.
Built by a Name Reloaders Trust
Lyman has been making bullet casting and reloading gear for generations, and their gas checks are a staple on loading benches for good reason. The gilding metal construction holds up under pressure and stays put through firing, giving you dependable performance load after load. For anyone serious about wringing accuracy and clean barrels out of cast .44 bullets, this is a simple, proven upgrade.
Key Specifications
- Caliber: .44
- Quantity: 1000 per box
- Type: Crimp-on gas checks
- Material: Gilding metal (copper)
- Use: Cast bullet base protection for gas-check bullets
- Manufacturer: Lyman
- Manufacturer Part Number: 2827272
- UPC: 011516272720
What’s Included
- 1000 Lyman .44 caliber crimp-on gas checks
Frequently Asked Questions
Do I need gas checks for my cast .44 loads?
It depends on how hard you're pushing them. A widely used rule of thumb is that cast bullets tend to start leading the bore above roughly 1,400 to 1,500 fps, so gas checks really shine with warmer .44 Magnum loads and hotter velocities. For mild target loads down at revolver or plain-base speeds, you can often get by without them, but a check gives you more headroom and cleaner barrels when you turn up the heat.
Will these Lyman gas checks fit any .44 cast bullet?
No, they only work on bullets cast from a mold designed with a gas-check base. That style of bullet has a reduced shank at the bottom so the check can crimp on without changing the bullet's full diameter. If your mold makes a plain-base bullet, these checks won't seat properly, so match them to a proper .44 gas-check design.
How do you seat these crimp-on gas checks?
They seat during the sizing step of your reloading process, typically in a lubricator-sizer like a Lyman 450 or 4500. You place the check on the bullet base and run it through the sizing die, which crimps the cup onto the shank squarely. Square, consistent seating is key to accuracy, so a dedicated gas check seater can help if you want extra uniformity.
What are Lyman gas checks made of?
They're formed from gilding metal, which is a copper-based alloy. That construction holds up to the pressure and heat at the bullet base and stays crimped in place through firing. It's the same tough material that lets the check seal off hot powder gases and keep them from cutting past the lead.




Reviews
There are no reviews yet.