0
0

Luth-AR 18″ 22LR Bull Barrel for 10/22 – 416 Stainless, 1/2×28

UPC: 812058033745

$190.99

7 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is Luth-AR's take on the classic Ruger 10/22 upgrade, and they nailed the fundamentals. The barrel is turned from a 416 stainless steel blank, measures 18 inches long, and carries a full bull profile from chamber to muzzle. Luth-AR cuts and finishes these in-house from blanks that arrive rifled and chambered, so you're getting a piece that's been dialed in stateside rather than a bin part with a rollmark slapped on it.

The reason a bull barrel matters on a 10/22 comes down to physics. That thick .920 outside diameter puts more weight up front, which helps steady the rifle and soaks up the tiny movements that pull your shots off target. A heavier barrel also resists the vibration and whip that thin sporter barrels get during the firing cycle, and the extra mass takes longer to heat up so accuracy stays consistent when you're feeding it magazine after magazine at the range.

What the Luth-AR 10/22 Bull Barrel Brings to the Table

You get a 1:16 twist, which is the rimfire standard and dials in nicely for common 40-grain .22 LR loads. The muzzle comes threaded 1/2×28, so a suppressor or muzzle device threads right on without a trip to a gunsmith. Six-groove rifling rounds out the package and is a nice touch you don't always see at this level of the 10/22 barrel market.

Dropping the Luth-AR Barrel Into Your 10/22

Swapping a 10/22 barrel is one of the friendlier home gunsmithing jobs out there. Pull the barreled action, lock the bolt open so you don't ding the extractor, back out the two V-block screws with a hex wrench, and the old barrel slides free. A dab of grease on the shank, seat the new barrel, snug the V-block back down evenly, and you're set. Because this is cut to stock spec, it works with the factory V-block and a standard 10/22 pattern receiver. Keep in mind a full bull profile needs a stock or chassis with the barrel channel opened up for a .920 barrel.

Key Specifications

  • Manufacturer: Luth-AR
  • Manufacturer Part Number: 22LRBLB1816
  • UPC: 812058033745
  • Caliber: 22 LR
  • Fitment: Ruger 10/22 style actions
  • Barrel Length: 18 inches
  • Material: 416 stainless steel
  • Profile: Bull (.920 outside diameter)
  • Twist Rate: 1:16
  • Rifling: 6-groove
  • Muzzle Threads: 1/2×28
  • Finish: Matte blast
  • Weight: 2.95 lbs
  • Country of Origin: USA

What’s Included

  • Luth-AR 18" 22LR bull barrel for 10/22 style actions

Frequently Asked Questions

Will this Luth-AR bull barrel fit my Ruger 10/22?

Yes, it's cut to the standard 10/22 pattern and drops into Ruger 10/22 style actions using the factory V-block and screws. The install is a straightforward home job with a hex wrench and a little grease on the barrel shank. Just lock the bolt open while you work so you don't damage the extractor.

Do I need a special stock for the .920 bull profile?

You do. A full bull barrel like this one needs a stock or chassis with the barrel channel opened up to clear a .920 diameter barrel. A standard sporter stock cut for a pencil barrel won't fit, so plan on a bull-barrel stock or a chassis with the insert removed.

What twist rate is the Luth-AR 10/22 barrel and what ammo does it like?

It runs a 1:16 twist, which is the rimfire standard and pairs well with common 40-grain .22 LR loads. That covers the bulk of plinking and match ammo you'll find on the shelf. Most standard velocity and target loads shoot great out of it.

Can I run a suppressor or muzzle device on this barrel?

Yes, the muzzle comes cut with 1/2×28 threads, which is the go-to thread pitch for rimfire cans and muzzle devices. You can thread a suppressor or brake right on without any extra machining. It ships without a thread protector shown, so a cap is a cheap add-on if you want to keep the threads clean.

Additional information

UPC

812058033745

Manufacturer

Manufacturer Part Number

22LR-BL-B18-16

Barrel Length

18"

Caliber/Gauge

.22 LR

Color

Silver

Model

Product Type

Barrel

Reviews

There are no reviews yet.

Be the first to review “Luth-AR 18″ 22LR Bull Barrel for 10/22 – 416 Stainless, 1/2×28”