$73.99
18 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Leupold BackCountry 2-Piece Ringmount for the Winchester 70 does away with the old separate-base-and-ring setup and combines them into one integrated unit. That means fewer parts, fewer failure points, and a cleaner connection between your rifle and your glass. Each mount is machined from a single piece of 7075-T6 aircraft-grade aluminum, so you get serious strength while keeping overall weight down to around 3.4 ounces for the pair. For anyone who counts ounces on long climbs, that matters.
This set attaches directly to the Winchester 70 receiver and accepts any riflescope with a 1-inch maintube. The high ring profile gives you about 1.1 inches of height measured from base to ring center, which clears larger objective bells while still letting you settle into a comfortable cheek weld. The matte black finish keeps glare down in the field and adds a layer of corrosion resistance for wet, nasty weather. It's the kind of mount that disappears on the rifle and just does its job hunt after hunt.
Setup is refreshingly simple thanks to the Torx hardware and traditional styling. The front and rear ringmounts are reversible, so you can swap their positions to fine-tune ring spacing for your particular scope and action length. Leupold calls for 22 in-lbs on the base-to-receiver screws and 28 in-lbs on the ring top screws. A good practice is to loosely assemble the ring tops first, set your eye relief at the highest magnification if you're running a variable, level the crosshair, then torque everything down evenly.
Backed by Leupold's Full Lifetime Guarantee and made right here in the USA, this ringmount set is a smart, no-nonsense choice for hunters who want their Model 70 topped with glass they can trust.
This set is built specifically for the Winchester 70 and attaches directly to the receiver, no separate base needed. The integrated design means the base and ring are one unit, giving you a precise, rigid fit. Just confirm your Model 70 uses the standard receiver pattern before ordering.
These rings are made for riflescopes with a 1-inch maintube. The high profile gives you roughly 1.1 inches of ring height, which helps clear larger objective lenses while keeping a natural cheek weld. If your scope has a 30mm tube, you'll want a different BackCountry model.
Each mount is machined from a single piece of 7075-T6 aircraft-grade aluminum, so they're both light and seriously rugged. At about 3.4 ounces for the set, they shave weight off your rig without giving up strength. The matte finish also adds corrosion resistance for wet, rough conditions.
Leupold recommends 22 in-lbs on the base-to-receiver screws and 28 in-lbs on the ring top screws. Don't apply oil to the screw threads, and double-check that the screws don't extend far enough into the receiver to interfere with the bolt. A quality torque driver and a leveling tool make the job clean and repeatable.
| UPC | 030317011505 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 171107 |
| Length | 1.39 |
| Model | |
| Mount Height | 1.10" |
| Mount Type | To Receiver |
| Package Height | 1.5 |
| Package Width | 2.7 |
| Product Type | 2-Piece Base/Rings |
| Shipping Weight | 0.28 |
| Style | Reversible Front/Rear |
You must be logged in to post a review.
Reviews
There are no reviews yet.