Description
The Lehigh Defense Xtreme Defense is a component bullet for folks who reload their own defensive ammo and want something with real backbone. These are machined from solid copper, so there's no lead and no jacket to separate. What sets them apart is the Fluid Transfer Monolithic nose design, where a set of radial flutes forces hydraulic energy inward and then back out through sharp cutting edges. The result is deep, straight penetration and a permanent wound cavity that runs larger than what you'd get from many expanding hollow points, all without the bullet relying on mushrooming to do its work.
What Makes the Xtreme Defense Bullet Tick
Because the Xtreme Defense is machined from one solid piece of copper, it holds together through tough stuff like heavy clothing and common barriers without deforming the way a traditional hollow point can when its cavity gets clogged. The minimal surface area at the tip concentrates force right at the point of contact, and the flutes do the pumping once the bullet hits fluid. The Xtreme Defense technology is built off the proven Xtreme Penetrator line, tuned to pull penetration depth back into a range that makes more sense for personal defense while keeping that oversized wound cavity.
Loading the .357 Cal 120gr Projectiles
These measure .357 in diameter with an overall length around .675 inches and a G1 ballistic coefficient of .153. The 120-grain weight runs on the lighter side for the caliber, which generally means snappier velocity and a bit less felt recoil than heavier bullets. They'll work up in .357 Magnum or .38 Special brass depending on your load data. Keep in mind these are projectiles only and not loaded ammunition, so you'll need your own brass, powder, and primers to build a finished round.
Each box holds 50 bullets, giving you a solid batch to develop a load and stock up on defensive handloads you trust.
Key Specifications
- Manufacturer: Lehigh Defense
- Product Line: Xtreme Defense
- Manufacturer Part Number: 09357120SP
- UPC: 810025507435
- Caliber: .357 Caliber
- Bullet Diameter: .357
- Bullet Weight: 120 Grain
- Bullet Type: Fluid Transfer Monolithic (FTM)
- Construction: Solid Copper, Lead Free
- Core Material: Copper
- Jacket Material: Copper
- Overall Length (OAL): .675 in
- G1 Ballistic Coefficient: .153
- Sectional Density: .135
- Quantity: 50 per Box
What’s Included
- 50 Lehigh Defense Xtreme Defense .357 120gr Fluid Transfer Monolithic copper bullets
Frequently Asked Questions
Are these Xtreme Defense bullets loaded ammunition or just projectiles?
These are component bullets only, not loaded ammo. You'll need to supply your own brass, powder, and primers to build finished rounds. They're meant for handloaders putting together their own defensive cartridges.
Can I load the .357 120gr bullets in .38 Special as well as .357 Magnum?
Yes, these .357-diameter bullets work in both .357 Magnum and .38 Special brass since both use the same bullet diameter. Just be sure to follow published load data for the specific cartridge you're building. Always start low and work up.
What makes the Fluid Transfer Monolithic design different from a hollow point?
Instead of relying on the nose mushrooming open, the Xtreme Defense uses radial flutes that force hydraulic energy inward and then outward to create the wound cavity. Because it's solid copper and doesn't need to expand, it holds its shape through barriers like heavy clothing that can plug up a traditional hollow point. The result is deep, straight penetration with a wound cavity larger than many expanding bullets.
Why choose a 120-grain bullet for .357?
The 120-grain weight is on the lighter end for the caliber, which generally gives you higher velocity and a bit less felt recoil than heavier options. For the Xtreme Defense, that velocity helps the fluid transfer design do its job. It's a good match for anyone wanting a snappier, controllable defensive load.





Reviews
There are no reviews yet.