Description
The Lee Precision 358-150-1R mould is a double cavity casting tool that drops a .358 diameter, 150 grain bullet with a 1-ogive round nose profile. It covers a nice spread of popular 38 caliber cartridges, so one mould keeps you busy loading 38 Special, 357 Magnum, 38 S&W, and 38 Colt New Police. If you shoot any volume of revolver loads, casting your own is one of the better ways to stretch a pound of lead.
Lee machines these blocks from aluminum instead of iron or steel, and that choice pays off at the pot. Aluminum heats up and cools down quickly, so you spend less time waiting and reach consistent, good bullets after only a handful of casts. The blocks also come in at roughly a third the weight of iron or steel, which makes a real difference when you settle in for a long casting session and your hands start to feel it. The block halves are precision machined for tight roundness and size control, and the tangential cutoff helps keep the sprue clean so you are not fighting a nib on every bullet.
What the 358-150-1R Mould Casts
This one throws a 150 grain bullet measuring about .740 inches overall, with the crimp groove sitting roughly a quarter inch back from the nose and a ballistic coefficient near .124. Keep in mind the listed weight is based on Lee's suggested alloy, so your actual weight will shift a little depending on the lead mix you run.
Getting the Most From Your Lee Double Cavity Mould
Two cavities doubles your output per pour compared to a single cavity block, which is a welcome upgrade if you load regularly. A quick note straight from Lee: skip the spray mold releases, since they tend to build up over time. Smoking the cavities with a wooden match, a bit of beeswax, or a butane lighter does the trick and keeps your bullets dropping clean.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90328
- UPC: 734307903282
- Model: 358-150-1R Double Cavity Mould
- Bullet Diameter: .358 in
- Bullet Weight: 150 grain
- Bullet Profile: 1-Ogive Round Nose
- Number of Cavities: 2
- Compatible Cartridges: 38 Special, 357 Magnum, 38 S&W, 38 Colt New Police
- Block Material: Aluminum
- Bullet Overall Length: Approx. .740 in
- Ballistic Coefficient: .124
- Country of Origin: United States
What’s Included
- Lee 358-150-1R double cavity aluminum bullet mould
- Mould handles
- Sprue plate
Frequently Asked Questions
What cartridges does the Lee 358-150-1R mould work for?
It casts a .358 diameter 150 grain bullet that drops right into the common 38 caliber family. That covers 38 Special, 357 Magnum, 38 S&W, and 38 Colt New Police. One mould handles a lot of revolver reloading.
Is this really a semi-wadcutter mould?
Some retailers list it under a semi-wadcutter name, but the 358-150-1R designation and Lee's own data describe a 1-ogive round nose profile. It is often cataloged as a semi wad round nose. If you want a true flat-shouldered wadcutter, look at Lee's dedicated wadcutter blocks instead.
Do the handles come with this Lee mould?
Yes. The mould ships with handles and the sprue plate, so you have what you need to start casting. You will still want your own lead pot, alloy, and sizing gear to round out the setup.
How many bullets does the double cavity mould cast per pour?
Two at a time, since it is a two cavity block. That doubles your output compared to a single cavity mould, which adds up fast over a long casting session. The lightweight aluminum also helps you keep a steady rhythm going.





Reviews
There are no reviews yet.