Description
The Lee Precision 90454 is a double cavity mould that casts a .277 inch diameter 135 grain round nose flat point bullet designed for .270 caliber rifles. Lee machines the mould blocks from aluminum, which is one of the big reasons casters keep coming back to these. Aluminum heats up and cools down faster than iron or steel, so you can get good bullets going after just a few pours, and the blocks weigh about a third of what steel blocks do, which makes long casting sessions a lot easier on your hands and wrists. The cavities are CNC machined for roundness and consistent sizing, and this design is set up to accept a gas check for better performance at rifle velocities.
What the Lee 90454 .277 Mould Casts
This is the C277-135-RF profile, a round nose with a flat point that reloaders have used successfully in cartridges across the .270 family, including .270 Winchester and .270 WSM. Folks running it report good results with subsonic and mid range loads, and plenty have taken it hunting and to the range for cheaper trigger time. Keep in mind that as cast diameter can run a touch over nominal depending on your alloy, so sizing and lubing to fit your particular bore is part of dialing it in.
Why Reloaders Reach for This Lee Rifle Mould
Lee bullet molds have a reputation for casting good projectiles at a price that is tough to beat, and the fact that handles come included is a nice touch that not every brand offers. The sprue plate is hard anodized, and the tangential cut off helps clean up the nip at the sprue. Pair it with the matching .278 sizer and gas checks, warm the blocks up before your first pour, and you will be dropping consistent .277 bullets in no time.
Made in the USA, this mould is a straightforward pick for anyone casting for a .270 who wants a proven, no nonsense setup.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90454
- UPC: 734307904548
- Bullet Profile: C277-135-RF Round Nose Flat Point
- Bullet Diameter: .277 inch
- Caliber: .270 Caliber
- Bullet Weight: 135 Grain
- Cavities: Double Cavity (2)
- Gas Check: Yes
- Block Material: CNC Machined Aluminum
- Sprue Plate: Hard Anodized
- Ballistic Coefficient: 0.31
- Country of Origin: Made in USA
What’s Included
- Lee double cavity mould block (.277 / 135 gr C277-135-RF)
- Hard anodized sprue plate
- Mould handles
Frequently Asked Questions
What size and weight bullet does the Lee 90454 mould cast?
It casts a .277 inch diameter 135 grain round nose flat point bullet, the C277-135-RF profile. That makes it a fit for .270 caliber rifles. As cast weight can vary slightly depending on the alloy you use, so expect some give and take based on your lead mix.
Does this mould come with handles?
Yes. This Lee double cavity mould ships with handles included along with the hard anodized sprue plate, so you have what you need to start casting. Gas checks and a bullet sizer are sold separately if you want to finish the bullets to a specific diameter.
Is the Lee .277 mould set up for gas checks?
It is. The C277-135-RF design accepts a gas check, which helps the cast bullet hold up better at rifle velocities. Reloaders casting for .270 Winchester and similar cartridges commonly run these with a gas check and the matching .278 sizer.
Why choose an aluminum mould over iron or steel?
Aluminum blocks heat up and cool down faster, so you can start producing good bullets after only a few casts. They also weigh about a third of what iron or steel blocks do, which cuts down on fatigue during long casting sessions. On top of that, aluminum resists rust, so storage is easier.





Reviews
There are no reviews yet.