Description
The Lee 356-125-2R is a double cavity bullet mold that casts .356 diameter, 125 grain round nose pistol bullets. It's a go-to for folks loading 9mm Luger, .380 Auto, and .38 Super who want to drop their per-round cost and take control of their own supply. Two cavities means you're pulling twice the lead every pour, which adds up fast over a casting session.
What the Lee 356-125-2R Mold Casts
This one throws a classic round nose profile with a 2 ogive radius, giving you a smooth-feeding bullet that works well through most semi-auto feed ramps. The finished bullet runs about .565 inches long before sizing, and once you run it through a sizer and lube it, it'll shoot right alongside jacketed stuff at typical handgun velocities. It's a no gas check design, so it keeps the process simple and cost-effective with standard lead alloys.
Why Casters Reach for the Lee Double Cavity Mold
Lee machines these blocks from aluminum, which is where the real convenience shows up. Aluminum heats up and cools down quicker than iron or steel, so you'll get good bullets after just a few warm-up casts instead of fighting cold blocks for twenty minutes. It's also roughly a third the weight of steel, which your forearm will thank you for during a long casting run. The cavities are CNC machined for consistent roundness and sizing, and the crimped block halves help hold that dimension cast after cast.
In the Box with the 356-125-2R
Unlike some molds that make you buy handles separately, this one ships ready to use. You get the mold blocks, the handles already included, and a molded storage case that holds the mold with handles attached plus space for a bullet sizer and punch. One tip from Lee worth passing along: skip the spray-type mold release products, since buildup in the cavity can shrink your cast diameter over time.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90309
- Model: 356-125-2R
- UPC: 734307903091
- Bullet Diameter: .356 inch
- Bullet Weight: 125 Grain
- Bullet Style: Round Nose (2 Ogive Radius)
- Cavities: 2 (Double Cavity)
- Block Material: Aluminum
- Gas Check: No
- Cast Bullet Length: Approx. .565 inch
- Compatible Cartridges: 9mm Luger, .380 Auto, .38 Super
- Handles Included: Yes
- Country of Origin: United States
What’s Included
- Lee 356-125-2R double cavity mold blocks
- Mold handles
- Molded storage case (holds mold with handles attached, plus space for a bullet sizer and punch)
Frequently Asked Questions
What cartridges will the Lee 356-125-2R mold work for?
This mold casts a .356 diameter 125 grain round nose bullet that's a natural fit for 9mm Luger, .380 Auto, and .38 Super. The round nose profile feeds well through most semi-auto pistols. You'll want to size and lube the cast bullets before loading for the best results.
Do I need to buy handles separately for this mold?
No, the handles are included with this mold, so you can start casting right away. It also ships with a molded storage case that holds the mold with the handles attached. That case even has room for a bullet sizer and punch.
Why does Lee make these blocks out of aluminum instead of steel?
Aluminum heats up and cools down much faster than iron or steel, which means you get good bullets after just a few warm-up casts. It's also about a third the weight of steel blocks, so there's less fatigue during a long casting session. The cavities are still CNC machined for tight roundness and sizing control.
Does the 356-125-2R mold require a gas check?
No, this is a plain-base design with no gas check, which keeps your process and cost down. These bullets are meant for standard handgun velocities in 9mm, .380, and .38 Super. Just size and lube them and they'll perform right alongside jacketed bullets at those speeds.



Reviews
There are no reviews yet.