Description
The Lee 90368 double cavity mold is built to cast a .309 inch diameter, 170 grain flat nose bullet, the classic C309-170-F design that feeds nicely through tube magazines in lever guns and works across a range of .30 caliber rifle loads like .30-30, .308, and .30-06. The flat nose profile is the big draw here, since it gives you a safe bullet shape for those tube-fed lever actions where pointed bullets are a no-go. Lee ships this one with the handles and sprue plate, so you've got everything you need to start pouring once you have your melt going.
Why the Aluminum Blocks on the Lee 90368 Make Sense
Lee machines these mold blocks from aluminum rather than iron or steel, and that choice pays off at the casting bench. Aluminum heats up and cools down faster, which means you can usually start dropping quality bullets after just a handful of casts instead of waiting on a cold block to come up to temperature. The blocks also run about a third of the weight of iron or steel molds, so your hands and wrists hold up a lot better during a long casting session. As a bonus, aluminum won't rust, so the cavities stay clean with basic care.
Getting Consistent Results from the C309-170-F
The two halves are CNC machined for tight roundness and size control, which is what keeps your cast bullets uniform from cavity to cavity. Running a double cavity means you're dropping two bullets per pour, a real time saver if you plan to cast a few hundred at a sitting. A quick break-in goes a long way with any new aluminum mold: give the cavities a scrub with a stiff brush and some soap to knock off any machining residue, then smoke the cavities with a wooden match, candle, or lighter before your first pour. Lee specifically steers folks away from spray mold releases, since those can build up and shrink your finished bullet diameter.
Keep in mind this mold is the casting block only and does not include sizing or lube equipment, so plan to size and lube your bullets separately before loading. Listed bullet weight assumes Lee's suggested alloy, and your actual weight will shift a bit depending on the lead mix you run.
Key Specifications
- Manufacturer: Lee Precision
- MPN / Model: 90368
- UPC: 734307903688
- Mold Design: C309-170-F
- Caliber: .30 Caliber
- Bullet Diameter: .309 inch
- Bullet Weight: 170 Grain
- Bullet Profile: Flat Nose
- Cavities: Double (2) Cavity
- Block Material: Aluminum
- Handles: Included
- Sprue Plate: Included
- Country of Origin: United States
- Overall Length: 10.75 in
What’s Included
- Lee 90368 double cavity aluminum mold block (C309-170-F)
- Mold handles
- Sprue plate
- Instruction sheet
Frequently Asked Questions
What cartridges will the Lee 90368 170 grain bullets work in?
This mold casts a .309 diameter 170 grain bullet suited to .30 caliber rifle cartridges such as .30-30 Winchester, .308, and .30-06. The flat nose profile is a good match for tube-fed lever action rifles where pointed bullets aren't safe. Always work up your loads using a current reloading manual for your specific cartridge and alloy.
Does the Lee 90368 mold come with handles and a sprue plate?
Yes, the handles and sprue plate are both included, so you can start casting once you have your melt and alloy ready. It does not include sizing or lube equipment, so you'll want to size and lube your bullets separately before loading them.
Why does Lee use aluminum for the 90368 mold blocks?
Aluminum heats up and cools down faster than iron or steel, so you can typically start dropping good bullets after just a few casts. The blocks are also about a third of the weight of iron molds, which means less hand fatigue during long sessions, and aluminum won't rust.
How do I break in the Lee 90368 before casting?
Clean the new cavities with a stiff toothbrush and soap to remove any machining residue, then smoke the cavities with a wooden match, beeswax candle, or butane lighter before your first pour. Skip spray mold releases, since Lee warns they can build up and reduce your bullet diameter. Ramp up your casting speed gradually as the block comes up to temperature for the best looking bullets.



Reviews
There are no reviews yet.