0
0

Lee REAL .50 Cal 320 gr Double Cavity Aluminum Bullet Mold

UPC: 734307903961

$33.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you shoot a .50 caliber muzzleloader and want a heavier conical that puts meat in the freezer, the Lee REAL double cavity mold lets you roll your own without relying on store stock. REAL stands for Rifling Engraved At Loading, and that name tells you exactly how it works. The bullet is sized so the driving bands bite into the rifling as you push it down the bore, which keeps it centered and gives you a tight, consistent seat on the powder charge. This mold casts a 320-grain solid conical measuring .502 at the base and stepping up through .507, .512, and .517 on the upper bands, with an overall bullet length right around .719 inches.

Why the Lee REAL Mold Earns Its Spot

Because it throws a solid slug instead of a patched round ball, the REAL loads fast, won't tumble in flight, and carries plenty of energy for deer and larger game. Folks running these report excellent accuracy with moderate charges, generally in the 60 to 85 grain range depending on caliber and barrel, and they tend to shoot well even in barrels that are a touch oversize. One tip worth passing along: cast these from pure soft lead, not wheel weights or hard alloy, or you'll fight them going down the bore. A good bullet lube in the grooves keeps fouling soft and leading down, and a lot of hunters like a lubed felt wad between the powder and bullet for the best groups.

Casting With the Lee Double Cavity Mold

The two-cavity block is machined from aluminum, which is where this mold really shines. Aluminum heats up and cools down faster than iron or steel, so you can be dropping good bullets after just a few casts, and it weighs about a third of what a steel block does for less hand fatigue during long sessions. The blocks won't rust, and the cavities are lathe bored for solid roundness and size control. Handles and the sprue plate come included, so you've got what you need to start casting once your pot is hot.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90396
  • UPC: 734307903961
  • Caliber: .50 Caliber
  • Bullet Weight: 320 grain
  • Bullet Type: REAL (Rifling Engraved At Loading) conical
  • Driving Band Diameters: .502, .507, .512, .517
  • Bullet Overall Length: .719 inches
  • Cavities: Double (2) cavity
  • Block Material: Aluminum
  • Use: Black powder / muzzleloader
  • Length: 10.8 inches
  • Shipping Weight: 0.875 lbs

What’s Included

  • Lee REAL .50 cal 320 gr double cavity aluminum mold block
  • Mold handles
  • Sprue plate
  • Instructions

Frequently Asked Questions

Does the Lee REAL mold cast a round ball or a conical?

It casts a solid conical bullet, not a round ball. REAL stands for Rifling Engraved At Loading, meaning the driving bands engrave into the rifling as you seat the bullet. This gives you a heavier, longer projectile than a patched round ball, which many hunters prefer for the added energy on game.

What kind of lead should I use with this .50 cal 320 gr mold?

Stick with pure, soft lead for REAL bullets. Hard alloys like wheel weights make the bullet tough to seat down the bore and can turn loading into a chore. Soft lead lets the bands engrave cleanly and keeps seating pressure reasonable.

Do I need to lube the bullets from this mold?

Yes, lubing is the way to go. A good solid lube in the grooves keeps the bore from leading, keeps fouling soft shot to shot, and makes seating easier. Many shooters also run a lubed felt wad between the powder and bullet, which can tighten up groups noticeably.

Why aluminum blocks instead of steel or iron on the Lee mold?

Aluminum heats and cools faster, so you start dropping good, fully filled-out bullets after just a few casts instead of waiting on the mold to come up to temperature. It also won't rust and weighs about a third of a steel block, which cuts down on hand fatigue during longer casting sessions.

Additional information

UPC

734307903961

Manufacturer

Manufacturer Part Number

90396

Color

2-CAVITY

Length

10.8000

Shipping Weight

0.875

Reviews

There are no reviews yet.

Be the first to review “Lee REAL .50 Cal 320 gr Double Cavity Aluminum Bullet Mold”