Description
If you load the old 8mm Mauser, you know factory and surplus brass comes in every length under the sun. The Lee Precision Quick Trim Die 8×57 Mauser takes the fuss out of getting every case to the same spot. It's a dedicated die body that holds the case firmly while the Lee cutter does the work, so there's no measuring, no adjusting, and no second-guessing between pieces of brass.
The die is precision-machined from solid steel and threaded 7/8"-14, so it drops right into any press that accepts standard reloading dies. Once it's set, each case gets trimmed to the correct 8×57 length and chamfered inside and out in a single pass. That inside-and-out chamfer is a nice touch since it means you're not grabbing a separate deburring tool after trimming. Lee sets the trim-to-length window at roughly 2.220 to 2.240 inches for this cartridge, and the die keeps you locked in there batch after batch.
How the 8×57 Mauser Quick Trim Die Fits Your Bench
This is a die body only, so it needs a cutter to run. It pairs with the Lee Deluxe Quick Trim Case Trimmer, the Value Trim, or the Deluxe Power Quick Trim if you want to spin it with a drill. If you already own one of those cutters for another caliber, adding this die is all you need to start trimming 8mm brass.
Why Reloaders Reach for the Lee Quick Trim 8×57 Die
Folks running mixed lots of 8×57 brass tend to like this setup, and it gets plenty of praise for handling military and commercial cases alike. Because the case is clamped tight during the cut, the mouth comes out square every time, which is exactly what you want feeding into seating and crimping. For a cartridge where brass quality varies as much as it does with the Mauser, having a fast, repeatable way to true up case length makes the whole reloading session go smoother.
Key Specifications
- Caliber: 8x57mm Mauser (8mm Mauser)
- Type: Quick Trim Die Body
- Die Series: Quick Trim
- Material: Solid machined steel
- Thread: 7/8"-14
- Trim-to-Length Range: 2.220 to 2.240 inches
- Dies In Set: 1
- Shell Holder Included: No
- Compatible Cutters: Lee Deluxe Quick Trim, Value Trim, Deluxe Power Quick Trim
- Country of Manufacture: United States
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90347
- UPC: 734307903473
What’s Included
- Lee Quick Trim Die body for 8×57 Mauser (cutter sold separately)
Frequently Asked Questions
Do I need anything else to use the 8×57 Mauser Quick Trim Die?
Yes. This is the die body only, so you'll need a Lee cutter to actually trim. It works with the Lee Deluxe Quick Trim Case Trimmer, the Value Trim, or the Deluxe Power Quick Trim. If you already own one of those for another caliber, this die is all you need to add 8×57 to the mix.
Does the Lee Quick Trim Die chamfer the case mouth too?
It does. As the cutter trims the case to length, it also chamfers both the inside and outside of the case mouth in the same cycle. That saves you from grabbing a separate deburring tool afterward and keeps your prep moving.
Will this die work with military surplus 8×57 brass?
It handles both military and commercial 8×57 cases. Because the case is clamped firmly while the cutter runs, the mouth comes out square regardless of the brass source. Reloaders working mixed lots of Mauser brass tend to find it especially handy for getting everything uniform.
Will the Quick Trim Die fit my press?
It's threaded 7/8"-14, which is the standard for reloading dies, so it threads into any press that accepts standard dies. Install it, set your cutter, and you're ready to trim without calipers or extra adjustments.




Reviews
There are no reviews yet.