Description
This is the die set most .40 and 10mm reloaders end up reaching for, and for good reason. Lee combines their wildly popular carbide three-die set with the Carbide Factory Crimp Die, giving you everything needed to run cases from start to finish on a single or progressive press. The carbide sizing die uses a hard, polished ring that sizes brass without any case lube, which saves you a messy step and keeps your bench a lot cleaner.
What the Lee Precision 4-Die Set Actually Does
You get four dies that each handle one job. The carbide full-length sizing die resizes the case and knocks out the spent primer with its decapping unit. The powder-through expanding die bells the case mouth while charging powder, so it pairs nicely with an Auto Disk or Pro Auto Disk measure. The bullet seating die sets your bullet to depth, and the Carbide Factory Crimp Die finishes things off. Separating the seating and crimping into two steps makes adjustment a whole lot simpler, and you don't have to chase one setting while messing up another.
Why Reloaders Keep Buying the Lee Carbide Die Set
The Factory Crimp Die is the piece folks rave about. It has an internal carbide ring that post-sizes the loaded round as it crimps, so anything that passes through the die is going to chamber freely with factory-like dependability. Reloaders who run these report smoother-feeding, more uniform ammo across straight-wall pistol brass, and the crimp holds bullets firmly without buckling the case.
Running 10mm Auto with the Lee Deluxe Set
While it ships set up for .40 S&W, this set doubles as a 10mm Auto kit. Back out the bullet seating die and powder-through expanding die about 1 3/4 turns and you're loading 10mm, with load data available in Lee's Modern Reloading. The dies use the standard 7/8-14 thread so they'll thread into any common reloading press, and everything stores in a flat four-die box with an airtight hinged cover to keep the machined surfaces protected between sessions.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90965
- UPC: 734307909659
- Caliber: .40 S&W / 10mm Auto
- Product Type: Deluxe 4-Die Set
- Die Material: Carbide
- Number of Dies: 4
- Thread Size: 7/8-14
- Case Lube Required: No
- Shell Holder: Included
- Length: 5.8 in
- Shipping Weight: 1.35 lb
- Country of Origin: United States
What’s Included
- Carbide full-length sizing die with decapping unit
- Powder-through expanding die
- Bullet seating die
- Carbide Factory Crimp Die
- Universal shell holder
- Powder dipper
- Instructions and load data sheet
- Flat four-die storage box with airtight hinged cover
Frequently Asked Questions
Can the Lee Carbide 4-Die Set load 10mm Auto as well as .40 S&W?
Yes. The set ships configured for .40 S&W, but it loads 10mm Auto once you back the bullet seating die and powder-through expanding die out about 1 3/4 turns. Load data for 10mm is found in Lee's Modern Reloading manual. Some folks also use it for .41 Action Express with similar adjustments.
Do I need case lube with these carbide dies?
No. The carbide sizing ring has a hard, polished surface that resizes brass without any lubrication, which is one of the main reasons reloaders prefer carbide for straight-wall pistol cases. That saves you the lube-and-tumble cleanup step and speeds up your loading sessions.
What does the Factory Crimp Die in this set do?
The Carbide Factory Crimp Die is the final step in the process and applies a firm, uniform crimp to hold the bullet in place. Its internal carbide ring post-sizes the loaded round as it crimps, so any cartridge that passes through will chamber freely with factory-like reliability. Separating crimping from seating also makes dialing in each operation much easier.
Will these dies fit my press?
They use the industry-standard 7/8-14 thread, so they'll thread into any common single-stage or progressive press. The set also includes the correct universal shell holder, so you've got what you need to start loading right out of the box.




Reviews
There are no reviews yet.