Description
This is Lee's four-die pistol set built around two of the most popular wheelgun rounds out there, .38 Special and .357 Magnum. Because the long .357 case and the shorter .38 share the same base, one set covers both, and plenty of folks run it on everything from single-stage presses to turrets. The carbide sizing die is the big draw for most reloaders, since it full-length resizes brass without needing case lube. That alone takes a messy, time-eating step out of your loading sessions.
What Sets the Lee Carbide 4-Die Set Apart
The reason this is a four-die set and not a three is the Carbide Factory Crimp Die. It applies a firm, uniform roll crimp and then post-sizes the finished round, which means any cartridge that passes through the die chambers cleanly with factory-like reliability. A solid crimp also matters a lot with .357 Magnum, where slower-burning magnum powders need good bullet tension for consistent ignition. Separating the seating and crimping into two steps makes dialing in your setup a lot more forgiving, too.
Running the .38 Special / .357 Magnum Die Set
The set includes a carbide full-length sizing die with decapping unit, a powder-through expanding die that bells the case mouth while you charge it, a bullet seating die, and the carbide Factory Crimp Die. Lee rounds it out with the correct shell holder, a powder dipper, and a printed instruction and load data sheet, all tucked into a hinged flat storage box. The dies use standard 7/8-14 threads, so they'll thread into just about any common press.
Reloaders who've run this set tend to point to the crimp quality and overall consistency as the standouts, and it has a strong following among people loading target and plinking ammo for revolvers. For anyone wanting to feed a .357 or .38 habit without buying factory ammo, it's a straightforward, well-proven way to get there.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90964
- UPC: 734307909642
- Caliber: .38 Special / .357 Magnum
- Product Type: Deluxe Pistol Carbide 4-Die Set
- Number of Dies: 4
- Die Thread: 7/8-14
- Sizing Die Material: Carbide (no case lube required)
- Shell Holder: Included
- Shipping Weight: 1.35 lbs
What’s Included
- Carbide full-length sizing die with decapping unit
- Powder-through expanding die
- Bullet seating die
- Carbide Factory Crimp Die
- Universal shell holder
- Powder dipper
- Instruction sheet and load data
- Flat hinged storage case
Frequently Asked Questions
Does the Lee Carbide 4-Die Set load both .38 Special and .357 Magnum?
Yes. The two cartridges share the same case diameter, so this one set handles both. When switching from .38 Special to the longer .357 Magnum case, you'll back the powder-through expanding die and the seating and crimp dies out a couple of turns to account for the added case length.
Do I need to lube my cases with this set?
No. The sizing die uses a carbide ring, so you can full-length resize straight-walled .38 and .357 brass without any case lube. That saves a step and keeps your brass cleaner. Some reloaders still add a light touch of lube just to make the handle stroke smoother, but it isn't required.
What's the difference between this 4-die set and a 3-die set?
The fourth die is the Lee Carbide Factory Crimp Die. It applies a firm roll crimp and then post-sizes the finished round, so anything that passes through chambers cleanly. Separating the crimp from the seating step also makes setup easier to dial in, which is why many revolver reloaders prefer the 4-die version.
Will these dies fit my press?
They use the industry-standard 7/8-14 die thread, so they thread into virtually any common single-stage, turret, or progressive press. The set works well on Lee presses and other major brands alike.




Reviews
There are no reviews yet.