Description
Anyone loading the big .45-70 Government knows it can be a stubborn cartridge to crimp well, and that is exactly where this Lee Precision Factory Crimp Die earns its keep. Instead of relying on case length or a traditional roll crimp, it uses a collet that gently but firmly squeezes the mouth of the case into the bullet, forming a tight, even crimp around the full circumference. The result is a round that holds together under recoil and feeds through your lever gun or single shot without the bullet walking out of the case.
What the Lee .45-70 Factory Crimp Die Does Differently
The collet design means it is nearly impossible to buckle a case the way you can with a standard roll crimp die, and trim length stops being such a nagging concern. A firm, consistent crimp also raises the pressure needed before the bullet starts to move, which translates to a more uniform pressure curve and tighter velocity spreads from shot to shot. Lee's own testing has shown that even bullets with no cannelure tend to shoot more accurately once they are crimped in place with this die, so it opens up more bullet options for your loads.
Setting Up the .45-70 Government Crimp Die
This is a single, dedicated crimp die that runs as the final step in your process, and it threads right into any standard reloading press whether you run a single stage or a progressive. The threaded adjustment screw lets you fine tune how aggressive the crimp is, so you can back it off for plinking loads or snug it up for stout hunting rounds that need to survive the magazine tube. Reloaders consistently point to how simple it is to set up and how repeatable the crimp comes out once it is dialed in.
For hunters and anyone running warm .45-70 loads, a solid crimp is not optional, and this die gives you that factory-style result without a lot of fuss. It is one of those tools that just works, which is a big reason it stays a favorite among folks loading this old warhorse of a cartridge.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90856
- UPC: 734307908560
- Caliber: .45-70 Government
- Product Type: Factory Crimp Rifle Die
- Crimp Style: Collet / segmented straight crimp
- Dies in Set: 1 (single crimp die)
- Material: Steel
- Adjustment: Threaded screw for adjustable crimp
- Press Compatibility: Standard single stage or progressive presses
- Length: 4.75 in
- Shipping Weight: 0.3 lb
What’s Included
- Lee Precision .45-70 Government Factory Crimp Die (90856)
Frequently Asked Questions
Do my .45-70 bullets need a cannelure to use the Lee Factory Crimp Die?
No, they do not. The collet in this die is strong enough to form a crimp groove on bullets that do not have a cannelure. Lee's testing has shown that even those bullets tend to shoot more accurately once crimped with this die.
Will this die work in a progressive press or just a single stage?
It works in both. The Lee Factory Crimp Die threads into any standard reloading press, so you can run it as your final station on a progressive or as a separate step on a single stage. Setup is straightforward either way.
Is trimming my cases to an exact length critical with this crimp die?
Not the way it is with a roll crimp die. Because the collet squeezes the case mouth into the bullet rather than relying on case length, trim length is far less critical. That is one of the things reloaders appreciate most about the Factory Crimp Die for the .45-70.
Does this die replace the crimp step in a standard .45-70 die set?
Yes, it is designed to be used as a standalone crimp station after your seating die. Many reloaders find it produces a more consistent crimp than the roll crimp built into standard seater dies. You can adjust how much crimp it applies with the threaded screw.





Reviews
There are no reviews yet.