Description
The Lee Precision 90839 Factory Crimp Die is a collet-style crimp die built specifically for the 7x57mm Mauser, one of those classic cartridges that can be a bit stubborn when it comes to getting a clean, repeatable crimp. This die solves that headache by squeezing the case mouth into the bullet rather than rolling it over, which means you get a firm, even hold without buckling the case the way a standard roll crimp can. It's a single die that threads into any press using standard 7/8"-14 threads, so it drops right into your existing setup.
What the 90839 Crimp Die Brings to Your Bench
The real strength here is the collet. It applies uniform pressure all the way around the case mouth, and because the squeeze is so firm, it will even form a crimp on bullets that have no crimp groove at all. That's a big deal for the 7×57, since you may be loading a mix of jacketed hunting bullets, surplus-style projectiles, or cast loads that weren't designed with a cannelure. Trim length isn't critical with this design either, which takes one more variable off your plate.
Why Reloaders Reach for the Lee 7×57 Factory Crimp Die
A firmer crimp isn't just about keeping bullets from walking under recoil in the magazine. Lee's own testing shows a solid crimp raises the pressure needed before the bullet starts to move, which smooths out the pressure curve and tightens up velocity spread. The practical payoff is better consistency downrange, especially useful for hunting loads or when your rifle's magazine length keeps the bullet off the rifling. An adjusting screw lets you dial in exactly how much crimp you want, so you're in full control of the final result.
Fit and Compatibility Notes
This die is made in the USA and arrives in its own storage case with instructions. Keep in mind a shell holder is sold separately, and the standard 7×57 setup uses a #2 shell holder. The die also covers the 7mm Spanish Mauser and .275 Rigby, since those share the same case dimensions.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90839
- UPC: 734307908393
- Caliber: 7x57mm Mauser (also 7mm Spanish Mauser / .275 Rigby)
- Product Type: Factory Crimp Rifle Die
- Crimp Style: Collet
- Thread Size: 7/8"-14 (fits standard presses)
- Material: Steel
- Country of Origin: United States
- Shell Holder: #2 (sold separately)
- Shipping Weight: 0.3875 lbs
What’s Included
- Lee Precision 90839 Factory Crimp Die (7x57mm Mauser)
- Plastic storage case
- Instructions
Frequently Asked Questions
Does the Lee 90839 Factory Crimp Die work on bullets without a crimp groove?
Yes. The collet is powerful enough to form its own crimp even on bullets that have no cannelure or crimp groove. That makes it handy for the 7×57 Mauser when you're loading a variety of jacketed or cast bullets that weren't originally designed with a groove.
Will this crimp die fit my press?
It fits any press that accepts standard 7/8"-14 threads, which covers the vast majority of single-stage and turret presses on the market. You just thread it in like any other die and adjust the set screw for your desired crimp.
Do I need a shell holder with the 90839 crimp die?
The die itself does not include a shell holder, so you'll need one to run it. Standard 7x57mm Mauser cases use a #2 shell holder, while the rimmed 7×57 variant uses a #5.
What does a factory crimp actually do for accuracy?
A firm, uniform crimp raises the pressure required before the bullet begins moving, which creates a more consistent pressure curve and reduces velocity variation shot to shot. In practical terms, that often translates to tighter groups, and it also keeps bullets from shifting under recoil in the magazine.




Reviews
There are no reviews yet.