Description
Reloading 9x18mm Makarov can be a little finicky, and the Lee Precision 90807 Carbide Factory Crimp Die is the piece that takes the guesswork out of the final step. It does two jobs in one stroke: a carbide ring inside the die post-sizes any part of the case that runs over spec, and a separate crimp section lays down a clean taper crimp on your loaded round. The result is ammo that chambers freely and feeds with that factory-like dependability you want out of a Mak.
What the 90807 Factory Crimp Die Brings to the Bench
The standout feature here is that carbide sizing ring in the base. As the round moves up into the die, it squeezes down any bulge or oversized spot left behind from seating, which is a common headache with semi-auto brass. Because it works off the outside of the case, trim length isn't critical, so you can skip the trimming and chamfering step on most pistol brass and save yourself some time. The crimp itself comes from a floating crimp sleeve you adjust by hand, making it tough to buckle a case the way you can with a conventional seat-and-crimp setup.
Dialing In Your 9mm Makarov Crimp
Setup is quick. The adjusting screw at the top lets you set exactly how much crimp you want, and once it's dialed you'll get the same repeatable result round after round. For the 9×18 Makarov, which headspaces on the case mouth, this die applies a taper crimp, which is the right style for a rimless auto-loading cartridge. A firm, uniform crimp matters more than a lot of folks think, since it helps ignition stay consistent and keeps your groups honest.
This is a standalone single die with 7/8-14 threads, so it screws right into any standard reloading press alongside your existing 9mm Makarov set. It's also a favorite among people running a Lee Bulge Buster kit, since the carbide ring is the part doing the sizing work. If you've already got a Makarov die set and want crimp and chamber consistency locked down, this is the add-on that gets you there.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90807
- UPC: 734307908072
- Caliber: 9mm Makarov (9x18mm)
- Product Type: Factory Crimp Pistol Die
- Crimp Style: Taper Crimp
- Sizing Ring Material: Carbide
- Number of Dies: 1
- Thread Size: 7/8-14
- Shellholder Included: No
- Storage Box Included: Yes
- Shipping Weight: 0.3 lbs
What’s Included
- Lee Precision 9mm Makarov Carbide Factory Crimp Die (1 die)
- Storage box
- Instructions
Frequently Asked Questions
Does the Lee 90807 die apply a roll crimp or a taper crimp?
It applies a taper crimp, which is the correct style for the 9x18mm Makarov since it's a rimless auto cartridge that headspaces on the case mouth. Some retailer listings mistakenly call it a roll crimp, but Lee specs it as taper. The finger-adjustable sleeve lets you set exactly how much crimp you want.
Do I need a separate shellholder with this Factory Crimp Die?
Yes, a shellholder is not included with the 90807. You'll use the standard shellholder for 9mm Makarov, which is often already in your die set or press kit. The die itself uses common 7/8-14 threads and fits any standard reloading press.
What does the carbide ring in the 90807 actually do?
The carbide ring sits in the base of the die and post-sizes any portion of the loaded case that runs over factory dimensions. That means bulges or oversized spots left from bullet seating get squared away, so every round chambers freely. It also makes this die a popular choice with the Lee Bulge Buster kit.
Do I still need to trim my brass when using this die?
Trim length isn't critical with the Factory Crimp Die because it works off the outside of the case rather than relying on an exact case length. For most pistol brass, that lets you skip the trimming and chamfering step and save time. It's one of the reasons handloaders like adding this die to their process.




Reviews
There are no reviews yet.