Description
If you've ever groaned at threading a die in and out of your press and re-setting the depth every single time, these Lee Breech Lock Quick Change Bushings fix that headache for good. Each bushing threads onto the top of your 7/8×14 die and locks it at the exact height you set. From there, the bushing drops into the press and locks solid with a quick partial turn. Pull it, drop in the next one, and you're back to loading in seconds with zero re-adjusting.
The design borrows an old idea from naval gun breeches, using an interrupted thread so the bushing seats in the same spot every time. That's the whole trick behind the "accurate" part of the quick change, since repeatability is what keeps your sizing and seating consistent batch after batch. These are machined from steel with a silver finish, so they hold up to years of use and plenty of swaps.
What the Lee Quick Change Bushings Do Best
Folks who run a single stage press and load several calibers get the most out of these. Set each die once in its own bushing, keep them organized on a rack, and run through your sizing, seating, and crimping steps without stopping to re-zero anything. A common story from reloaders is processing a batch of handgun brass in small runs because the die change takes all of about five seconds instead of several minutes.
Fitment Notes for the 90600 Bushings
This is the standard steel version with 7/8×14 internal threads, which covers the vast majority of reloading dies on the market. They pair naturally with Lee Lock Rings and fit Lee presses built for the Breech Lock system. Lee also makes a spline drive version that tightens with an Allen wrench, but these standard bushings let you seat a die as low as possible, which comes in handy on certain setups. Coming two to a pack, you can set up a couple of dies at once or keep a spare on hand.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90600
- UPC: 734307906009
- Product Type: Quick Change Bushing
- Thread Size: 7/8×14 Internal Threads
- Material: Steel
- Finish: Silver
- Caliber/Gauge: Multi-Caliber
- Compatibility: Fits Lee Breech Lock Presses
- Quantity: 2 Pack
- Country of Origin: United States
What’s Included
- 2 Lee Breech Lock Quick Change Bushings (7/8×14)
Frequently Asked Questions
What dies do the Lee Breech Lock Quick Change Bushings fit?
They fit any standard 7/8×14 threaded reloading die, which is the most common thread size out there. That covers the majority of Lee, RCBS, Hornady, and other brand dies. The bushings themselves drop into Lee presses built for the Breech Lock system.
Do I have to re-adjust my die every time I swap it out?
No, that's the whole point of these bushings. You set the die once in the bushing and lock it down, and from then on it threads in and out of the press at the same height every time. A partial turn seats and locks the bushing, so you can go from sizing to seating to crimping without touching your adjustments.
How is this different from the Lee spline drive bushings?
The spline drive version tightens with an Allen wrench, while these standard bushings lock in by hand with a quick turn. These also let you seat a die as low as possible in the press, which helps on certain setups. Both work with Lee Lock Rings, so it comes down to how you like to run your bench.
Is one 2-pack enough for a full set of dies?
Each bushing holds one die, so a 2-pack covers two dies at a time. Many reloaders buy a few packs so every die in their rotation stays set up in its own bushing. That way you can run a complete loading sequence without ever re-zeroing a die.




Reviews
There are no reviews yet.