Description
Anyone who reloads mixed or range-picked pistol brass knows the headache of the low base bulge. Brass fired through chambers that don't fully support the case head, like a lot of popular polygonal-barreled autos, swells right down at the base where a normal sizing die can't reach. That's exactly the problem the Lee Bulge Buster Kit solves. Instead of resizing from the top with a shell holder in the way, this kit lets you push the entire case all the way through the die so the full length gets sized back to spec.
How the Lee Bulge Buster Does Its Job
The kit works as a push-through adapter that installs into a Lee Carbide Factory Crimp Die, which is sold separately. The reason it needs that specific die is that the carbide sizing ring inside the Factory Crimp Die has a slightly larger inside diameter than a standard carbide sizing die, so it squeezes the case only if it's over the SAAMI max rather than over-working good brass. You feed cases in one after another, and each new one pushes the last out the top into the catch container. Lee recommends running it in a single stage press, or a turret press with the index rod pulled.
What the Bulge Buster Kit Fits
This is a caliber-specific tool, and it only works with 380 ACP, 10mm, 40 S&W, 41 AE (using the 40 S&W Factory Crimp Die), 45 ACP, 45 GAP, and 45 Win Mag. It is not set up for 9mm Luger, so keep that in mind if that's your main pistol round. For folks buying once-fired brass or scooping up whatever's on the ground at the range, it's a cheap insurance policy against that brass hanging up during feeding.
Reloaders who run a lot of 40 S&W out of unsupported chambers tend to get the most mileage out of it, since that cartridge is a notorious bulge offender. The result is ammunition that chambers cleaner and crimps more consistently, all from a tool that takes just a minute to set up and is genuinely simple to run.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number (MPN): 90487
- UPC: 734307904876
- Product Type: Case Prep Kit
- Function: Removes lower base bulge from fired handgun brass
- Compatible With: Lee Carbide Factory Crimp Die (sold separately)
- Compatible Calibers: 380 ACP, 10mm, 40 S&W, 41 AE, 45 ACP, 45 GAP, 45 Win Mag
- Thread Size: 7/8 x 14
- Press Requirement: Single stage press, or turret press with index rod removed
- Color: Red/Silver
- Length: 4.8 in
- Capacity: 1
What’s Included
- Extension sleeve
- Push-through punch
- Catch container
- Complete instructions
Frequently Asked Questions
Does the Lee Bulge Buster Kit come with a die?
No, the die is not included. You'll need a caliber-specific Lee Carbide Factory Crimp Die, which is sold separately. The Factory Crimp Die is required because its carbide sizing ring is dimensioned specifically for push-through bulge removal, and you'll also need a single stage press.
What calibers does the Bulge Buster work with?
It's designed for 380 ACP, 10mm, 40 S&W, 41 AE, 45 ACP, 45 GAP, and 45 Win Mag only. For 41 AE you use the 40 S&W Factory Crimp Die. If your caliber isn't on that list, the Bulge Buster is not set up to work with it.
Will the Lee Bulge Buster work on 9mm brass?
No, this kit does not work with 9mm Luger. It only covers the rimless handgun calibers listed by Lee. If 9mm is your main round, this particular tool won't help with it.
How do I reduce the effort needed to push cases through?
If pushing cases through feels stiff, try backing the die out slightly so you're only pushing the rim through right at the top of the ram stroke. That's the point where your press gives you the most mechanical advantage. Running it on a sturdy single stage press also makes the whole process smoother.



Reviews
There are no reviews yet.