Description
If you're loading .41 Remington Magnum, this is the die that takes the guesswork out of crimping. The Lee Carbide Factory Crimp Die does two jobs at once: it rolls a firm, consistent crimp into the case mouth while a carbide ring at the base post-sizes the finished round. The result is a cartridge that drops freely into your cylinder every time, with the kind of dependability you'd expect from factory loaded ammo.
What the Lee .41 Mag Factory Crimp Die Does Differently
A solid crimp matters more than folks realize, especially with the slow-burning powders that magnum loads live on. A firm, even crimp helps those powders ignite cleanly and keeps your velocities and pressures consistent from shot to shot, which translates to better accuracy downrange. Even bullets without a cannelure tend to group tighter when they get a proper crimp from this die. The carbide sizing ring squeezes down any part of the case that runs over spec, so you won't be fighting rounds that stick or drag when you load the cylinder.
Setting Up Your Carbide Factory Crimp Die
The adjusting screw up top makes setting your crimp quick and repeatable. The floating crimp ring is finger adjustable, so you can fine-tune the amount of crimp without tools and without overdoing it. Because the case is being sized as it's crimped, trim length isn't nearly as fussy as it is with a standard seat-and-crimp setup, which saves you time at the bench. The die uses the standard 7/8-14 thread, so it threads right into any common single stage, turret, or progressive press.
A Smart Add for .41 Magnum Reloaders
Running crimping as its own separate station lets you keep your seating depth dead consistent and simplifies setup across the board. That's a real plus if you shoot heavy or hot .41 Mag loads where case sizing can get a little unpredictable. For anyone building serious revolver ammo, this die earns its spot in the toolhead.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90416
- UPC: 734307904166
- Caliber: .41 Remington Magnum
- Die Type: Carbide Factory Crimp Die
- Crimp Style: Roll Crimp
- Material: Carbide sizing ring
- Thread: 7/8-14
- For Use With: Pistol and revolver cartridges
- Dies In Set: 1 (single die)
- Adjustment: Finger-adjustable floating crimp ring
- Shipping Weight: 0.4 lbs
What’s Included
- Lee Carbide Factory Crimp Die for .41 Magnum (90416)
- Instruction sheet
Frequently Asked Questions
What kind of crimp does the Lee .41 Mag Factory Crimp Die apply?
This die applies a roll crimp, which is what you want for revolver cartridges like the .41 Remington Magnum. The floating crimp ring is finger adjustable, so you can set as light or as firm a crimp as your load calls for. A good roll crimp into the bullet's cannelure helps lock everything in place under recoil.
Do I still need to trim my cases if I use this die?
Trim length is far less critical with the Factory Crimp Die because the carbide ring sizes the case while it crimps. That takes a lot of the fuss out of case prep compared to a standard seat-and-crimp die. You'll still want cases in reasonable shape, but you won't be chasing exact trim lengths as closely.
Will this die work on my progressive or turret press?
Yes. It uses the standard 7/8-14 thread, so it screws into any common single stage, turret, or progressive press. Running crimping at its own station is a nice way to keep your bullet seating depth consistent while handling the crimp separately.
Why crimp with a separate die instead of using the seating die?
Separating seating and crimping lets you keep dead-length seating dialed in while the carbide ring post-sizes the loaded round for reliable chambering. That consistent crimp also helps slow-burning magnum powders ignite cleanly, which improves accuracy. It's an extra step, but it pays off with more uniform ammo.





Reviews
There are no reviews yet.