Description
The .45 Long Colt has a reputation among reloaders for being a pain to crimp cleanly, especially when you're working with jacketed or cast bullets that don't have a cannelure. That's exactly where this Lee Collet Style Crimp Die earns its keep. Instead of relying on a conventional roll or taper crimp, it uses a collet that squeezes the case mouth into the bullet, applying a rifle-type crimp that grabs hard and stays put. The collet is strong enough to form its own crimp groove, so you don't need bullets that come with one from the factory.
What Sets the Lee .45 Long Colt Collet Die Apart
The big draw here is consistency. Because the collet squeezes rather than rolls the brass, you avoid the shaved case mouths and buckled cases that plague folks running standard dies on non-cannelure bullets. A firm, uniform crimp also helps on the accuracy side, since the bullet needs more pressure to start moving, which smooths out your pressure curve and tightens velocity spread. If you're loading heavy .45 Colt rounds or anything destined for a tube magazine, that extra hold matters.
Setting Up and Running the Collet Crimp Die
This is a single die that threads into any standard 7/8-14 press, so it drops right into your existing setup as a separate crimping step. Trim length isn't critical with the collet design, which saves you some fuss compared to dies that demand precisely trimmed brass. One thing worth knowing from folks who run it daily: go easy on the adjustment. Dialing in too much crimp can spring the collet fingers, so sneak up on the setting and you'll get years of service out of it.
A Note on the .45 Long Colt Collet Die Construction
Keep in mind this particular die is not carbide, so it's strictly a crimping tool rather than a sizer. You'll still want a separate sizing die in your process. A shellholder is not included, so grab the correct one for your press if you don't already have it on the bench.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90302
- UPC: 734307903022
- Caliber: .45 Long Colt
- Die Type: Collet Style Crimp Die
- Crimp Style: Rifle-type collet crimp
- Dies In Set: 1 (single die)
- Thread Size: 7/8-14
- Material: Steel (not carbide)
- Ammunition Type: Handgun
- Country of Origin: USA
What’s Included
- Lee .45 Long Colt Collet Style Crimp Die (single die)
- Instructions
Frequently Asked Questions
Do bullets need a crimp groove to use the Lee Collet Style Crimp Die?
No, and that's the whole point of this die. The collet is powerful enough to form a crimp groove on its own, so you can crimp jacketed or cast bullets that have no cannelure. This makes it a favorite for .45 Long Colt loads where finding grooved bullets can be a hassle.
Is this .45 Long Colt die carbide?
No, this die is not carbide. It's a dedicated crimping die, not a sizer, so it doesn't resize the case while crimping. You'll want to use a separate sizing die earlier in your reloading process.
Does the Lee Collet Crimp Die come with a shellholder?
No, a shellholder is not included with this die. You'll need the correct shellholder for your press and the .45 Long Colt case. If you already reload the cartridge, you likely have the right one on hand.
Will this die work in a standard reloading press?
Yes, it uses the common 7/8-14 thread, so it fits standard single-stage and turret presses. It runs as its own crimping step, separate from seating. Trim length isn't critical with the collet design, which keeps setup simple.




Reviews
There are no reviews yet.