0
0

Lee 90384 Conical Cap & Ball Mould Double Cavity .456 220gr RN

UPC: 734307903848

$33.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Conical Cap & Ball Mould (90384) is built for folks who want more out of their percussion revolver than a patched round ball can give. It casts the 456-220-1R projectile, a .456 diameter, 220-grain round nose conical, and the double cavity design lets you drop two at a time to keep your casting sessions moving. The lube grooves on this design help cut down on lead fouling and flash ignition, and the heavier conical carries more energy and shoots flatter than a round ball of the same bore.

What Makes the Lee 90384 Mould Tick

Lee machines the mold blocks from aluminum, which is the real strength here. Aluminum heats up and cools down faster than iron or steel, so you spend less time waiting between pours and get usable bullets sooner. It also weighs about a third of what a steel block does, which your wrist will thank you for during a long run. The cavities are lathe bored for tight roundness and size control, and the steel sprue cutter gives you a clean cut-off every time.

Casting Good Bullets With the Cap & Ball Mould

Like any aluminum mould, this one casts best once the blocks are properly smoked and brought up to temperature. Reloaders who follow the instruction sheet and prep the blocks report nice bullets right from the first good pour. A quick note from the folks who make these: skip the spray-type mold release products, since they can build up in the cavities over time. Smoke the blocks with a match or lighter instead and you're set.

Where the .456 220gr Conical Shines

This bullet is a favorite for the Ruger Old Army and works well in other cap and ball sixguns chambered for a .45 ball, and plenty of folks also run these 220-grain conicals in .45 Colt. If you've been shooting round balls and want more downrange punch and tighter groups, stepping up to a conical is the natural move. The mould ships complete with hardwood handles, so you can get to casting without chasing down extra parts.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90384
  • Bullet Number: 456-220-1R
  • UPC: 734307903848
  • Bullet Diameter: .456 inch
  • Bullet Weight: 220 grain
  • Bullet Type: Round Nose Conical
  • Ogive: 1 Ogive Radius
  • Cavities: Double (2-Cavity)
  • Block Material: Machined Aluminum
  • Sprue Cutter: Steel
  • Handle Material: Hardwood
  • Length: 10.8 inches
  • Country of Origin: United States
  • Shipping Weight: 0.89 lb

What’s Included

  • Lee 90384 double cavity bullet mould (456-220-1R)
  • Hardwood mould handles
  • Instruction sheet

Frequently Asked Questions

What bullet does the Lee 90384 conical mould cast?

It casts the 456-220-1R projectile, a .456 diameter, 220-grain round nose conical with a 1 ogive radius. The double cavity design drops two bullets per pour. The listed weight is based on Lee's suggested alloy, so your actual weight can vary a little depending on the lead mix you use.

What guns is the .456 220gr conical meant for?

This conical is a well-known choice for the Ruger Old Army and other cap and ball percussion revolvers chambered for a .45 ball. Many casters also use the 220-grain .456 bullet in .45 Colt loads. Compared to a round ball, the conical carries more energy and tends to group tighter.

Are the mould handles included with the Lee 90384?

Yes, this mould ships complete with hardwood handles and an instruction sheet, so you can start casting without buying anything extra. The handles attach to the aluminum blocks and give you a comfortable, durable grip for long casting sessions.

Why is this cap and ball mould made from aluminum?

Aluminum blocks heat up and cool down faster than iron or steel, which speeds up your casting rhythm and gets you usable bullets sooner. They're also about a third of the weight of steel blocks, so there's less fatigue during extended runs. For best results, smoke the blocks before casting and avoid spray-type mold release products.

Additional information

UPC

734307903848

Manufacturer

Manufacturer Part Number

90384

Color

2-CAVITY

Length

10.8000

Shipping Weight

0.8938

Reviews

There are no reviews yet.

Be the first to review “Lee 90384 Conical Cap & Ball Mould Double Cavity .456 220gr RN”