Description
The .45 Schofield is one of those old-school cowboy cartridges that's a whole lot easier to shoot when you're loading your own, and this Lee Carbide 3-Die Set is built to make that job painless. The star of the show is the carbide full-length sizing die, which uses a solid carbide insert ground to a special contour so it won't leave that ugly belt mark on your brass that ordinary carbide dies are known for. Because the sizing ring is carbide, you skip the case lube entirely and you don't have to clean it off afterward, which is a real time-saver when you're working through a pile of brass.
What the Lee .45 Schofield Die Set Does at the Bench
The three dies cover the core steps of straight-wall pistol loading. The powder-through expanding die flares the case mouth just enough for easy bullet insertion while letting you charge powder in the same stroke, and it pairs nicely with a Lee Auto Disk measure if you run one. The bullet seating die finishes the round with an adjustable crimp that runs from a slight taper to a full roll, so you dial it in based on your bullet and how the rounds cycle in your gun. Since the Lee expander only flares the minimum needed, the seating die removes that flare on its own.
Why Handloaders Reach for This Schofield Set
Lee builds in a few touches that make life easier: an unbreakable decapper, a free-floating seater plug, an integrated stuck-case remover, and finger-adjustable locking rings so you can tweak settings without hunting for a wrench. Everything tucks into a storage box that keeps the set organized between sessions. It ships with a universal shell holder, a powder dipper, and instructions with starting load data, so a newer reloader has enough to get rolling and a veteran gets a dependable set that'll run for years. Whether you're feeding a Schofield-pattern revolver or a lever gun chambered for the round, this set turns a hard-to-find cartridge into a range-day staple.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90323
- UPC: 734307903237
- Caliber: .45 Schofield / .45 S&W
- Die Set Type: Carbide 3-Die Pistol Set
- Number of Dies: 3
- Sizing Die Material: Solid carbide insert, contour ground
- Case Lube Required: No
- Crimp Style: Adjustable, slight taper to full roll
- Locking Rings: Finger adjustable
- Shipping Weight: 1.2125 lbs
What’s Included
- Carbide full-length sizing die
- Powder-through expanding die
- Bullet seating die with adjustable crimp
- Universal shell holder
- Powder dipper
- Instructions and load data
- Storage box
Frequently Asked Questions
Do I need case lube with the Lee .45 Schofield carbide die set?
No, and that's the big draw here. The full-length sizing die uses a carbide insert, so you can size brass dry without lube and skip the cleanup step afterward. It keeps the process quick and a lot less messy than steel sizing dies.
Does this set include a shell holder?
Yes. Lee packs a universal shell holder in the box along with a powder dipper and load-data instructions. That gives you the essentials to start loading .45 Schofield once you have a press and components.
Can this die set crimp my .45 Schofield rounds properly?
It can. The bullet seating die has an adjustable crimp that ranges from a slight taper to a full roll, and you control the amount by how close you set the die to the shell holder. For lead bullets in a revolver or lever gun, a roll crimp into the cannelure usually works well.
Will this set also load .45 S&W ammunition?
Yes. The .45 Schofield and .45 S&W are the same cartridge, so this set covers both under either name. It's the correct choice for Schofield-pattern revolvers and lever guns chambered for the round.





Reviews
There are no reviews yet.