0
0

Lee Precision 533-410-M Improved Minie Mould .53 Cal 410gr Single Cavity

UPC: 734307904739

$41.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Precision 533-410-M is a single-cavity mould built to cast .533 inch diameter, 410 grain Improved Minie bullets, a go-to projectile for .54 caliber muzzleloading rifles and muskets. It falls in Lee's Improved Minie line, which is designed to be a little easier to cast and load than the original pattern, so it's a solid pick whether you've been casting for years or you're just getting your pot warmed up for the first time.

What Sets the 533-410-M Minie Mould Apart

Like the rest of Lee's lineup, the blocks are CNC machined from aluminum. That matters for a few real reasons out at the bench. Aluminum heats up and cools down faster than iron or steel, so you can start dropping good bullets after just a few casts instead of babying the mould for ten minutes. It's also roughly a third the weight of a steel block, which your forearm will thank you for during a long casting session. The cavity won't rust and lead doesn't like to stick to it either. The trade-off is that aluminum is softer than blued steel, so treat it gently, especially during break-in, and it'll last you a very long time.

Casting Hollow-Base Minies the Right Way

This is a hollow-base Minie with an automatic core pin that self-aligns and drops the bullet free when you flip the mould. The hollow base is what makes the Minie work. Fired over black powder, the thin skirt flares out and grips the rifling, which is why these bullets are a favorite for accuracy in period muzzleloaders. For best results, cast with soft pure lead so that skirt expands properly, keep your melt and your base plug hot to avoid voids forming inside the base, and keep a steady casting cadence. A tiny bit of tin in the melt helps fill-out if you're fighting wrinkly bases.

Fit and Use

The 533-410-M comes with hardwood handles and a hard anodized sprue plate, so it's ready to use out of the box with your melting pot and a dipper or bottom-pour furnace. The listed 410 grain weight is figured on Lee's suggested alloy, so your actual bullet weight will shift a bit depending on the lead you run. Proudly made in the USA.

Key Specifications

  • Manufacturer: Lee Precision
  • Model: 533-410-M Improved Minie
  • Manufacturer Part Number (MPN): 90473
  • UPC: 734307904739
  • Bullet Diameter: .533"
  • Bullet Weight: 410 grains
  • Caliber: .53 / .54 Caliber
  • Cavities: Single Cavity
  • Bullet Style: Improved Minie, Hollow Base
  • Core Pin: Automatic self-centering core pin
  • Block Material: CNC Machined Aluminum
  • Sprue Plate: Hard Anodized
  • Ammunition Type: Black Powder
  • Country of Origin: Made in USA
  • Shipping Weight: 0.7 lb

What’s Included

  • Lee 533-410-M single-cavity Minie mould block
  • Hardwood mould handles
  • Hard anodized sprue plate
  • Automatic core pin

Frequently Asked Questions

What size bullet does the Lee 533-410-M Minie mould cast?

It casts a .533 inch diameter, 410 grain hollow-base Improved Minie bullet. That diameter is intended for .54 caliber muzzleloading rifles and muskets. Keep in mind the 410 grain figure is based on Lee's suggested alloy, so your real-world weight will vary a little depending on the lead you use.

Do the handles come with this mould?

Yes. The 533-410-M ships with hardwood handles and a hard anodized sprue plate included, so it's ready to cast right out of the box. All you need to add is your melting pot and a safe setup to pour from.

What kind of lead should I use with this Minie mould?

Soft pure lead is the way to go for hollow-base Minies. The thin skirt needs to flare out and grip the rifling when fired, and pure lead lets it do that properly. A hard alloy can keep the skirt from expanding the way it should, so stick with soft lead for best accuracy.

Is it hard to cast good hollow-base Minies with this mould?

The biggest thing is heat. Hollow-base molds can form voids in the base if the mould or the base plug runs too cool, so keep your melt hot and your casting cadence steady. A small amount of tin in the melt helps fill-out, and keeping lead on the sprue plate a few seconds as the bullet cools cuts down on shrinkage voids.

Additional information

UPC

734307904739

Manufacturer

Manufacturer Part Number

90473

Bullet Weight (Grains)

410

Caliber/Gauge

53 Caliber

Shipping Weight

0.7

Reviews

There are no reviews yet.

Be the first to review “Lee Precision 533-410-M Improved Minie Mould .53 Cal 410gr Single Cavity”