0
0

Lee Precision 454-298-M Improved Minie Mold .45 Cal 298gr Single Cavity

UPC: 734307904692

$41.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Precision 454-298-M is a single cavity aluminum mold built to cast an improved Minie bullet in .45 caliber. It drops a .454 diameter, 298 grain projectile, which runs oversize by about .004 inches to give you room to size down to your exact bore. The traditional Minie design with a hollow base lets the skirt expand into the rifling under the pressure of a black powder charge, and the automatic core pin centers itself every time you close the blocks so you get consistent cavities without extra fuss.

Why the 454-298-M Casts So Well

Lee machines these mold blocks from aluminum, which carries a few real advantages at the pot. Aluminum heats and cools faster than iron or steel, so you can usually start pulling good bullets after just a handful of casts instead of waiting around for a cold block to come up to temperature. It also weighs roughly a third of what a steel block does, which your hands and wrists will thank you for during a long session. On top of that, the blocks are rust resistant and the halves are precision machined for tight roundness and size control.

Getting the Most From Your 454-298-M Minie Mold

Minie bullets are one of the more demanding projectiles to cast, but they are very doable with a little practice. Stick with pure, soft lead so the skirt will flare properly into the grooves. Run your melt a touch hotter than you would for round balls to get a clean fill in the base cavity, and give the mold a few throwaway casts to bring it up to heat before you start keeping bullets. Done right, this mold can turn out around 200 bullets an hour.

This is a single cavity, traditional style Minie mold that ships with handles and a sprue plate, so you have what you need to start casting .45 caliber Minie bullets right out of the box for your muzzleloader.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 90469
  • Model: 454-298-M Improved Minie
  • UPC: 734307904692
  • Caliber: .45 Caliber
  • Bullet Diameter: .454 in (oversize by .004 in)
  • Bullet Weight: 298 Grains
  • Bullet Type: Black Powder Minie (hollow base)
  • Cavities: 1 (Single Cavity)
  • Block Material: Aluminum
  • Core Pin: Automatic self-centering
  • Country of Manufacture: United States

What’s Included

  • Lee 454-298-M single cavity Minie mold blocks
  • Mold handles
  • Hard anodized sprue plate

Frequently Asked Questions

What kind of lead should I use with the 454-298-M Minie mold?

Pure, soft lead is the way to go for Minie bullets. The hollow skirt needs to expand into the rifling when the charge goes off, and harder alloys like wheel weights will not flare properly, which hurts accuracy. If you can scratch the lead easily with a fingernail, it is usually soft enough for this mold.

Why does this mold cast an oversize .454 bullet?

Lee builds the 454-298-M to drop a bullet about .004 inches over nominal size on purpose. That extra material gives you the option to size the Minie down to match your exact bore for the best fit and accuracy. A Minie that fits your barrel closely tends to shoot a lot better than one that is undersized.

Is the 454-298-M hard to cast with for a beginner?

Minie bullets are among the more demanding projectiles to cast, but they are well within reach with a little practice. Expect to drop several back in the pot while your mold comes up to temperature, and run your melt a bit hotter than you would for round balls to get a clean fill in the base. Once the block is properly warmed up, you can turn out around 200 bullets an hour.

Does the 454-298-M come with handles?

Yes. This single cavity mold ships with mold handles and a hard anodized sprue plate, so you have the core setup needed to start casting right away. You will still need your own melting pot, a ladle or dipper, and a supply of pure lead.

Additional information

UPC

734307904692

Manufacturer

Manufacturer Part Number

90469

Bullet Weight (Grains)

298

Caliber/Gauge

.45 Caliber

Shipping Weight

0.6938

Reviews

There are no reviews yet.

Be the first to review “Lee Precision 454-298-M Improved Minie Mold .45 Cal 298gr Single Cavity”