0
0

Lee 92388 Micrometer FL Die Set 7.5×55 Swiss (Schmidt-Rubin)

UPC: 734307923884

$35.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee 92388 is a two-die set built for anyone loading the 7.5×55 Swiss, also known as the Schmidt-Rubin, whether you are feeding a K31, a straight-pull Schmidt-Rubin, or a sporterized action. The headline feature here is the micrometer bullet seating die, which lets you set seating depth down to the thousandth and come right back to it later. If you have been chasing a specific overall length for your rifle, this takes the guesswork out of it.

What the Lee 92388 Die Set Brings to the Bench

The seating die uses a laser-engraved micrometer thimble that reads just like a precision depth micrometer, with each division representing one thousandth of an inch. There are no clicks to fight through, just smooth adjustment, so splitting a thousandth is easy. Record your setting, back it out to clean or swap bullets, and dial it right back in. The full-length sizing die handles the rest, resizing the whole case so your reloads chamber reliably, which makes it a smart pick for new brass and mixed range pickups alike.

Fitting the 92388 to Your Press

Like the rest of the Lee rifle lineup, these dies use the industry-standard 7/8-14 thread, so they drop into any common single-stage, turret, or progressive press from Lee, RCBS, Hornady, Lyman, Dillon, and the like. The set ships with a universal shell holder sized for the Swiss case, a powder dipper, and instructions with starting load data, so you have what you need to get rolling.

One thing worth knowing: full-length sizing a bottleneck case like the 7.5×55 calls for good case lube to prevent stuck cases and keep the sizer die happy. Once your brass has been fired and fire-formed to your chamber, a lot of folks add a neck sizing die down the road for longer case life and tighter groups, but the 92388 covers the core job of turning out accurate, consistent Swiss ammo on its own.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 92388
  • UPC: 734307923884
  • Caliber: 7.5×55 Swiss (Schmidt-Rubin)
  • Set Type: Micrometer Full Length 2-Die Set
  • Seating Die: Micrometer Bullet Seating, reads in .001 increments
  • Sizing Die: Full Length Sizing Die
  • Thread: 7/8-14 standard
  • Shell Holder: Universal, included
  • Material: Steel
  • Ammunition Type: Rifle
  • Country of Origin: United States

What’s Included

  • Full Length Sizing Die
  • Micrometer Bullet Seating Die
  • Universal Shell Holder
  • Powder Dipper
  • Instructions with load data

Frequently Asked Questions

Will the Lee 92388 die set work for my K31?

Yes, the 92388 is chambered for the 7.5×55 Swiss, which is the exact round the K31 and other Schmidt-Rubin rifles fire. The full-length sizing die resizes the whole case so your reloads chamber reliably in those actions. It is a popular setup for Swiss surplus shooters loading their own ammo.

What does the micrometer seating die actually do for me?

The micrometer thimble lets you set bullet seating depth in precise thousandth-of-an-inch increments and return to that exact setting whenever you want. That means you can find the overall length your rifle likes, write it down, and repeat it load after load. It takes the trial-and-error out of dialing in seating depth.

Does the 92388 fit my press?

These dies use the standard 7/8-14 thread, so they fit virtually every common reloading press on the market, including Lee, RCBS, Hornady, Lyman, and Dillon. You can run them on a single-stage, turret, or progressive setup. No special adapters needed.

Do I need anything else to load 7.5×55 Swiss with this set?

The set comes with the two dies, a universal shell holder, a powder dipper, and load data, so you have the core components covered. You will want good case lube on hand, since full-length sizing a bottleneck case requires it to avoid stuck cases. Many reloaders also add a factory crimp or neck sizing die later for finer control and longer brass life.

Additional information

UPC

734307923884

Manufacturer

Manufacturer Part Number

92388

Reviews

There are no reviews yet.

Be the first to review “Lee 92388 Micrometer FL Die Set 7.5×55 Swiss (Schmidt-Rubin)”