Description
The 6mm ARC lives in a tight window where seating depth really matters, since the cartridge was built around high-BC 6mm bullets that have to work within AR magazine length. That leaves less room for error than you'd have with a longer-action round, which is exactly why a micrometer seater earns its keep. This Lee set (part number 92374) gives you a full-length sizing die and a micrometer bullet seating die, so you can return brass to consistent dimensions and fine-tune bullet depth without guesswork.
What the 92374 Micrometer Die Set Brings to the Bench
The star of the set is the laser-engraved micrometer thimble, marked in one-thousandth-of-an-inch divisions that read just like a precision depth micrometer. Adjustment is smooth with no clicks, so you can nudge seating depth up or down in increments that show up on target during load development. When used as a dead length seater, the die body contacts the shell holder to keep your seating depth uniform round after round, and an O-ring helps the setting hold firm through long loading sessions.
Sizing and Alignment on the 6mm ARC Set
The full-length sizing die works the whole case back to consistent dimensions, which is the setup you want for AR feeding reliability or for taming mixed range brass. On the seating side, a floating bullet guide holds the case mouth and bullet in alignment for measurably less runout, and the burnished seating stem is made to handle nearly any bullet nose style without marking it up. The guide is also reversible, so if you unthread and flip it, you can seat and crimp in one stroke, which is a nice touch Lee does that most seaters don't.
Loading New or Mixed Range Brass
Lee recommends this two-die set when you're working with new or mixed range brass. If you're loading for hunting or your magazine length keeps the bullet off the rifling, a separate Lee Factory Crimp die pairs well here to lock in that last bit of consistency. For gas-gun use where bullet setback during feeding is a concern, that crimp die is worth adding to the lineup.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92374
- Model Number: 92374
- UPC: 734307923747
- Cartridge: 6mm ARC
- Die Set Type: Micrometer Full Length 2-Die Set
- Dies Included: Full Length Sizing Die, Micrometer Bullet Seating Die
- Micrometer Divisions: 0.001 inch, laser engraved
- Seating Adjustment: Smooth, no-click, infinitely adjustable
- Thread Size: 7/8"-14
- Shell Holder: Universal shell holder included
- Shipping Weight: 0.44 lb
What’s Included
- Full Length Sizing Die
- Micrometer Bullet Seating Die
- Universal Shell Holder
- Powder Dipper
- Instructions with Load Data
Frequently Asked Questions
What dies come in the Lee 92374 6mm ARC set?
This is a two-die set that includes a full-length sizing die and a micrometer bullet seating die. You also get a universal shell holder, a powder dipper, and instructions with load data. It covers the core steps for loading 6mm ARC, with a separate factory crimp die available if you want to add one.
Does the micrometer seating die let me adjust depth precisely?
Yes, the seating die uses a laser-engraved micrometer thimble marked in one-thousandth-of-an-inch divisions that reads just like a precision depth micrometer. The adjustment is smooth with no clicks, so you can make fine depth changes that matter during load development. An O-ring helps the setting stay put through long loading runs.
Can this die set seat and crimp at the same time?
The floating bullet guide in the seating die is reversible. If you unthread it and flip it, you can seat and crimp in a single operation, which is a feature exclusive to Lee. For dedicated crimping on hunting loads or gas-gun ammo, many reloaders still add the separate Lee Factory Crimp die.
Is this set good for AR-15 and bolt-action 6mm ARC?
The full-length sizing die returns fired brass to consistent dimensions, which is what you want for reliable feeding in an AR platform. Bolt-action shooters benefit from the micrometer seater when chasing an accuracy node by testing different seating depths. Lee suggests this two-die set when loading new or mixed range brass.





Reviews
There are no reviews yet.