Description
Loading for 9×21 can be a tough caliber to source dies for, so this Lee Precision set fills a real gap for anyone running that cartridge. It's a three-die arrangement that covers the whole process from start to finish: a steel full-length sizing die to bring fired brass back to spec, a powder-through expanding die to flare the case mouth and charge your powder in one motion, and a bullet seating die that handles seating and crimping together. A universal shell holder and printed instructions round out the kit, so you've got what you need to set up on a single-stage or progressive press.
What the Lee 9×21 Die Set Brings to the Bench
These are steel dies, which means you'll want to lube your cases before sizing. That's the one habit to build with any steel sizer, but the payoff is a die ground to a special contour that avoids the belt mark common to ordinary steel dies. The expanding die flares just enough for easy bullet starting, and because the seating die removes that flare as it crimps, you won't need a separate taper crimp die to finish the round. The seating die itself adjusts from a light taper to a full roll crimp, giving you room to tune your load.
Getting Consistent Rounds from Your 9×21 Set
Lee dies have a strong reputation for value and clean machining, and this set follows that pattern. The steel sizing die in this kit will also work on 9mm Luger brass, which is a handy bonus if you dabble in both. Keep in mind that load data doesn't ship with the dies, so you'll want to pull published data from your powder manufacturer before you start charging cases. Add some case lube to your cart if you don't already keep it on the shelf, and you're ready to run.
For handloaders chasing a hard-to-find caliber, this set is a straightforward, dependable way to keep the 9×21 fed without hunting down pricier options.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 91891
- UPC: 734307918910
- Cartridge: 9×21
- Gun Type: Handgun / Pistol
- Die Material: Steel
- Number of Dies: 3
- Sizing Type: Full-Length
- Case Lube Required: Yes
- Crimp Type: Adjustable, light taper to full roll
- Shell Holder Included: Yes, Universal
- Shipping Weight: 1.215 lbs
What’s Included
- Steel Full-Length Sizing Die
- Powder Through Expanding Die
- Bullet Seating Die
- Universal Shell Holder
- Printed Instructions
Frequently Asked Questions
Do the Lee 9×21 steel dies require case lube?
Yes. Unlike carbide pistol dies, this is a steel sizing die, so you'll want to lightly lube your cases before running them through to size. Lee resizing lubricant works well, and lubing keeps sizing smooth while helping prevent stuck or galled cases. Plan to clean the lube off your brass afterward.
Does this set include a taper crimp die?
It doesn't, and the design means you don't need one. The expanding die flares the case mouth just enough for easy bullet seating, and the bullet seating die removes that flare as it crimps. That seating die adjusts from a slight taper all the way to a full roll crimp.
Will the 9×21 sizing die work on 9mm Luger brass?
Yes. The steel full-length sizing die in this set will also size 9mm Luger brass, which is a nice bonus if you load both cartridges. Keep in mind the rest of the dies are set up for the 9×21 case dimensions and overall length.
Does load data come with the Lee 9×21 die set?
No, load data is not included with the dies. You'll want to reference published data from your powder manufacturer before charging any cases. Always work up loads carefully using a trusted, current reloading manual or manufacturer source.





Reviews
There are no reviews yet.