$114.97
24 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
There's a reason the Arwen line from UTG PRO has become a go-to pick for guys building out their own AR-15 uppers. This 14 inch free float handguard is cut from 6061-T6 aluminum and finished in a matte black hard coat anodizing that holds up to years of range trips and field use without flaking or fading. The octagonal profile isn't just for looks either, it's got thoroughly machined lightening cuts that shave weight off the front end while still keeping a comfortable grip in hand.
Most free float handguards make you fuss with timing the barrel nut to line up with your gas tube. Leapers solved that headache with a patented steel barrel nut design that skips the timing dance altogether, so you just tighten the two locking screws and you're done. Integral anti-rotation tabs keep everything locked in tight against the upper receiver, which means no flex or twist once it's torqued down. The whole thing plays nice with standard mil-spec forged upper receivers, though fit on billet uppers can vary depending on the manufacturer's tolerances.
Up top you get a full 34 slot Picatinny rail that runs flush and continuous with your upper receiver, giving you a clean, unbroken sight line for optics or back up irons. Down the sides and bottom there are 21 M-LOK slots spread across three tracks, plus 4 more slots angled along 45 degree tracks up front for lights or lasers positioned off-axis. That gives you plenty of real estate to run a rail section, angled foregrip, sling mount, or whatever your build calls for without running out of room.
This handguard fits over barrel nuts up to 1.05 inches in diameter and measures 13.75 inches from flush with the receiver to the tip. It's designed and machined here in the USA, and Leapers backs it with a lifetime warranty against defects in material and workmanship.
This handguard is built for standard mil-spec forged AR-15 upper receivers and works with barrel nuts up to 1.05 inches in diameter. If you're running a billet upper, fitment can be hit or miss depending on the manufacturer, so it's worth checking your upper's specs before ordering.
No, that's actually one of the bigger selling points of this design. The steel barrel nut is built so you don't have to worry about lining it up with your gas tube, you just torque it down and tighten the two locking screws to secure the handguard.
You get 21 M-LOK slots spread across three tracks running down the sides and bottom, plus 4 additional slots on angled 45 degree tracks near the front for mounting lights or lasers off-axis.
Yes, the 34 slot Picatinny top rail is designed to sit flush and continuous with the upper receiver, giving you an uninterrupted rail for mounting optics or iron sights without any step or gap.
| UPC | 4717385556256 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | MTU046SEM |
You must be logged in to post a review.
Reviews
There are no reviews yet.