$268.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Skip the rail clutter and bulky external laser sights. This internal laser solution integrates directly into your guide rod, giving you a red laser that's as close to the barrel as possible. Installation takes just 20 minutes if you can field strip your Glock, and once it's in place, you're looking at a sight that comes factory-aligned and never drifts out of zero.
The laser sits where your factory guide rod normally goes, pulsing for visibility and easy identification on target. An ambidextrous on/off switch built into the takedown lever lets you engage it from either side of the frame. Since it's mounted internally, your slide does all the containing, which means the unit meets Mil-Spec and Homeland Security durability standards for drop tests, blowing sand, temperature extremes, and deep water immersion.
Once installed, you won't need to adjust anything. Factory alignment means the laser shoots to center of mass at 20 yards with a 0.63-inch dot at that distance, and it stays aligned even after battery changes. The 5mW red laser (635nm wavelength) is bright enough for low-light work, though direct sunlight will dim it some. You're looking at about a year of typical carry use before batteries need replacing, and standard silver oxide 393 batteries are cheap and available everywhere.
The real win here is simplicity. Your current holster works fine. Your favorite grips don't change. Tactical lights mount normally. There's nothing sticking out to catch on anything. The laser turns on and off with the takedown lever, and if it ever fails, you've still got your iron sights to fall back on.
No. If you know how to field strip your Glock, you can install it yourself in about 20 minutes. It's as simple as removing the factory guide rod and dropping in the laser assembly. LaserMax includes clear step-by-step instructions, and videos are available on their YouTube channel.
Not at all. Since the laser sits entirely inside your gun, your current holster works fine. Same with tactical lights and grips. The laser doesn't change your pistol's profile or ergonomics, which is one of the biggest advantages over rail-mounted options.
No. This laser comes factory-aligned for center-of-mass accuracy at 20 yards and is guaranteed to stay aligned. It never drifts, and it maintains its zero even after battery changes. The proximity to the barrel and the way it mounts keep it locked in.
The 5mW red laser works well in low-light and indoor conditions. In bright sunlight, the dot is less visible at longer distances, but it's still usable for target acquisition within 10-15 yards. If daylight visibility at distance is critical for your use, a green laser model might be better, but the red is solid for most carry and defensive scenarios.
| UPC | 798816011425 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | LMS-1141P |
| Dot Size | 0.63" at 20 Yards |
| Mount Type | Guide Rod Assembly |
| Power | 5mW |
| Shipping Weight | 0.25 |
You must be logged in to post a review.
Reviews
There are no reviews yet.