$419.99
9 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The LaRue LT845 is a purpose-built 34mm quick-detach scope mount for anyone running a precision rifle who needs to add a rangefinder, illuminator, or clip-on night vision to the setup. It runs LaRue's Speed Lever QD system, so you can pull your optic off and drop it back on without tools while holding a reliable return-to-zero. That makes it a real favorite on setups where the optic and accessories have to come apart for transport, cleaning, or a swap between rifles.
What separates the LT845 from a plain set of rings is the reinforced forward ring, which carries a 3.875-inch MIL-STD-1913 Picatinny platform up top. That gives you room to mount a RAPTAR, a red dot, or other gear, and there's a 1/4-20 threaded insert along the rail for bolting a RAPTAR-series unit directly to the mount. Instead of one lever, it uses two locking levers for a more secure hold on the rail, which is a nice touch when you're bouncing around in a truck or a pack.
The optic sits 1.535 inches above the rail, a height chosen to line up cleanly with weapon-mounted clip-on night vision. There's zero built-in cant, so your optic stays on true centerline out of the box. Guys running everything from Nightforce and Schmidt & Bender glass to Revic and Trijicon scopes with a PVS-27 or RAPTAR up front have leaned on this mount specifically for that alignment.
Machined from 6061-T6 aluminum with a black anodized finish, the LT845 is built to take a beating and keep holding zero. Fit and finish is what LaRue is known for, and folks who own several of their mounts tend to come back for another. It ships with two rear ring cap options, so you can run a standard cap or one with a short rail section for an AB REM 100.
The LT845 is built for 34mm scope tubes only. It's a popular tube diameter across a lot of modern precision optics, so it pairs well with plenty of long-range glass. Make sure your scope has a 34mm main tube before ordering.
Yes. The mount uses LaRue's Speed Lever quick-detach system, which is designed for a dependable return-to-zero after you remove and reinstall it. Owners routinely pull their optics for transport or maintenance and report the setup drops right back in without a noticeable shift.
That's exactly what this mount was designed for. The reinforced forward ring carries a 3.875-inch Picatinny platform plus a 1/4-20 threaded insert for bolting a RAPTAR-series unit directly to the mount. Folks also run other laser rangefinders and clip-on night vision off that top rail.
That height was chosen to line up cleanly with weapon-mounted clip-on night vision devices. Combined with zero built-in cant, it keeps your optic on true centerline. If you're building a rifle with a clip-on NV device in front of the scope, that alignment matters.
| UPC | 810143180978 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | LT845 |
You must be logged in to post a review.
Reviews
There are no reviews yet.