$274.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
LaRue Tactical built its reputation on quick-detach hardware that just works, and the LT808-30 is a two-piece take on that same idea. These 30mm rings clamp onto any MIL-STD-1913 Picatinny rail using LaRue's Speed Levers, so you can strip your scope off the gun and reinstall it later without losing your zero. That kind of repeatability is the whole reason people reach for a QD setup in the first place, whether you're traveling with the optic packed separately, swapping glass between rifles, or just want the peace of mind that your point of impact stays put.
The big number to know here is the 1.375" centerline height. That's a tall mount, and it puts these rings on the higher end of LaRue's lineup. For reference, the LT808 sits about .095" taller than LaRue's LT123, which matters if you're running a large objective bell, need clearance over a folded rear sight, or want a heads-up shooting position on a semi-auto. If your build leans toward a lower cheek weld, take a look at the ring height carefully before you commit, because this one is built for setups that need the extra room.
The Speed Lever design is what makes this mount worth the money. Flip the levers and the rings pull down tight against the rail, locking into the same spot every time. Machined from aircraft-grade aluminum with a hardcoat anodized finish, they hold up to hard recoil and rough handling. LaRue also throws in a spare ring screw and the QD adjustment wrench, so you've got what you need to set lever tension right out of the gate.
This is a straightforward, no-nonsense mount from a company that shooters trust for exactly this job. If a dependable return-to-zero and a fast, tool-free scope swap are on your list, the LT808-30 delivers.
Yes, that's the main reason to run this mount. The Speed Lever system pulls the rings down into the same position on the rail every time, so your optic returns to zero after being removed and reinstalled. It's ideal for travel, storing the scope separately, or moving glass between rifles.
The LT808-30 clamps to any MIL-STD-1913 Picatinny rail, which covers most modern AR-platform rifles and plenty of bolt guns with a Pic rail. As long as you've got a standard Picatinny surface, these rings will lock right on. Just make sure your optic uses a 30mm main tube to match the rings.
It depends on your rifle and how you shoot. At 1.375" centerline, this is a tall mount that runs about .095" higher than LaRue's LT123, which is great for large objective scopes, sight clearance, or a heads-up position on a semi-auto. If you want a low cheek weld on a bolt gun, measure your clearance first since this one favors taller builds.
No tools are needed to mount or dismount once the levers are set. You flip the Speed Levers by hand to clamp and release the rings from the rail. The included QD adjustment wrench is only for dialing in the lever tension during the initial setup.
| UPC | 810143180930 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | LT808-30 |
You must be logged in to post a review.
Reviews
There are no reviews yet.