$135.99
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
When it comes to brass that reloaders trust without a second thought, Lapua sits near the top of the heap. This 6.5 Creedmoor case is built with a large rifle primer pocket, so if you're already stocked up on large rifle primers or you just prefer them for cold-weather ignition, this is the version you want. It's the unprimed, new-production case out of Finland, ready for you to size, prime, and load to your own recipe.
Lapua builds these cases from high-quality raw material with serious attention to hardness, grain structure, and wall concentricity. The case heads are drawn hard, which is a big reason these hold primer pockets tight and stay dimensionally stable over a long string of reloads. The neck and shoulder are annealed at the factory, so they stand up to repeated sizing without getting brittle. One thing worth knowing: that factory annealing can leave a slight discoloration on the necks until you clean the brass, and that's completely normal.
The 6.5 Creedmoor is a short-action round that punches way above its recoil, which is exactly why it dominates precision rifle matches and does honest work on deer and mid-size game. Starting with consistent brass takes a lot of variables off the table before you ever touch a powder measure. With concentric necks and uniform wall thickness, you get cleaner bullet seating and more predictable velocities, which is where accuracy really lives.
These are new, unprimed cases and not loaded ammunition, so they'll need resizing before that first loading. Treat them right with proper cleaning, trimming, and annealing down the road, and Lapua brass will reward you with the kind of case life that makes the upfront cost pay for itself. For a reloader chasing tight groups or building dependable hunting rounds, it's hard to beat starting with a foundation this good.
This particular case (part number 4PH6013C) is built with a large rifle primer pocket. Lapua offers a separate small rifle primer version under a different part number, so if you specifically want small primer brass, make sure you're grabbing the right one. The large primer option is a solid pick if you already run large rifle primers or like their reliable ignition in colder conditions.
These are new, unprimed brass cases only. There's no primer, powder, or bullet included, so you'll be building the complete round yourself at the bench. It's meant for handloaders who want to craft their own 6.5 Creedmoor loads from the ground up.
Yes, new unprimed brass should always be resized before you load it. This gets every case to a uniform dimension and ensures proper chambering and neck tension. It's a standard step with any fresh brass and a quick one before you start priming.
That light discoloration near the neck and shoulder comes from Lapua's factory annealing process, which is a good thing. Annealing extends case life and helps the brass hold up through repeated reloads. The marks clean right off during your normal brass prep, so there's nothing to worry about.
| UPC | 6418267200660 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 4PH6013C |
| Quantity | 100 Per Box |
| Shipping Weight | 2.8 |
You must be logged in to post a review.
Reviews
There are no reviews yet.