$147.99
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Lapua has spent decades building a reputation around one thing: brass that holds its shape and keeps performing long after cheaper cases have given up. These .30-06 Springfield cases carry that same pedigree, arriving new, unprimed, and ready to drop into your reloading process. If you shoot the venerable '06 for big game or ring steel at mid-range, this is the kind of brass that rewards the work you put into a careful load.
The .30-06 Springfield gives you noticeably more powder capacity than its .308 Winchester sibling, which is part of why it has stayed relevant for over a century. That extra room pairs nicely with Lapua's tight manufacturing tolerances, so you get consistent case weights, uniform neck thickness, and the kind of repeatable results that make load development less of a guessing game. The base is hard and strong, keeping dimensions steady and holding primers snug in the pocket even after repeated firings.
Lapua anneals the neck and shoulder of every case, which is the real secret behind the longevity reloaders rave about. That annealing lets the brass expand and contract through firing and resizing without getting brittle, so you can run these through the press again and again. The body is firm enough to extract cleanly whether you full-length size or just bump the neck, and the uniform grain structure means you are starting with a genuinely level playing field.
Each case uses a Large Rifle primer pocket and seats a standard .308 diameter bullet, so it fits right into typical '06 load data and dies. Worth knowing: Lapua necks tend to run a touch thicker than most factory brass, which gives you a slightly tighter neck tension that many folks find helps accuracy. A quick measure and light prep before your first loading goes a long way, and from there these cases tend to just work, lasting through more cycles than surplus or bargain brass ever will.
No, these are new unprimed cases with a Large Rifle primer pocket. You will need to add your own primers, powder, and bullets to assemble a loaded round. This is reloading brass, not loaded ammunition.
Lapua cases are built to be reloaded many times over, thanks to a hard, strong base and annealed neck and shoulder that resist fatigue. Reloaders regularly report getting well beyond the life of surplus or bargain brass out of these. Your exact mileage depends on your load pressure, your rifle's chamber, and how you size the cases.
The .30-06 Springfield case uses a Large Rifle primer pocket. It accepts standard boxer-style Large Rifle primers, so it works with common '06 load recipes and reloading dies.
A quick inspection and light prep is smart with any new rifle brass. Lapua necks tend to run slightly thicker than typical factory cases, so it's worth measuring neck clearance for your chamber. A minor dent or two from the final wash is normal and usually irons out on the first firing without affecting case life.
| UPC | 6418267200783 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 4PH7068C |
| Shipping Weight | 3.1813 |
You must be logged in to post a review.
Reviews
There are no reviews yet.