$17.60
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The L.E. Wilson New Case Holder for 6.5×47 Lapua is the piece that makes a Wilson case trimmer sing. It cradles your brass by the body taper rather than gripping the case head like a traditional shell holder, which keeps the case in true axial alignment with the cutter. The result is trim lengths that stay consistent across a whole batch, not just case to case but session to session. This particular holder also fits 6×47 Lapua brass, so it covers both necks in that family.
Think of this as a mini chamber for your bench. You drop the case in, give the head a light tap on a firm surface to seat it, and the holder supports the body for trimming, primer pocket reaming, neck reaming, and deburring when paired with Wilson's Uniform Deburring Tool. When you're done, a tap on the case mouth pops it right back out. It works with any model of the L.E. Wilson Case Trimmer, and the whole thing is machined from steel and made in the USA for a lifetime of service.
This is the New Case version, which is the one you want for brand-new, unfired brass and for cases that have been full-length resized. New and full-length sized brass runs slightly smaller in body diameter than fired brass, so the new case holder has a tighter internal taper to match and keep everything snug and aligned. If you neck size only or trim once-fired brass that hasn't been bumped back down, you'd reach for the Fired version (CH-X47L) instead. Plenty of 6.5×47 reloaders running Lapua brass keep both on hand to cover every stage of their brass prep.
Because cases are held by body taper and not the head, diameter and length determine the correct holder. Most 6.5×47 Lapua brass seats beautifully in the new case holder, though an occasional oversized chamber can leave full-length sized brass needing the fired holder instead. For standard setups, this one handles your new brass trimming with the precision Wilson is known for.
The New Case holder (NCH-X47L) is cut with a tighter internal taper for brand-new, unfired brass and cases that have been full-length resized. The Fired Case holder (CH-X47L) is reamed slightly larger for fired, neck-sized brass that has expanded in the chamber. If you full-length size your brass, this New Case holder is the right call; if you neck size only, you'll want the Fired version. Many 6.5×47 reloaders keep both so they're covered through every stage of brass prep.
Yes. This holder is designed for both 6×47 Lapua and 6.5×47 Lapua new and full-length sized brass. Since Wilson holders grip by the case body taper rather than the head, the shared parent case family lets one holder cover both necks.
It works with any model of the L.E. Wilson Case Trimmer, including the stainless version. Beyond trimming, you can use it for primer pocket reaming, neck reaming, and deburring when paired with Wilson's Uniform Deburring Tool, which is sold separately.
Drop the case into the holder and give the case head a light tap on a firm surface to seat it fully. The body taper holds it in true alignment while you trim. When you're finished, a gentle tap on the case mouth releases it.
| UPC | 815145028303 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | NCH-X47L |
| Shipping Weight | 0.2 |
You must be logged in to post a review.
Reviews
There are no reviews yet.