Description
Kimber got its start building accurate, lightweight mountain rifles, and the Mountain Ascent Peak is that heritage carried into the current lineup. This one is chambered in .300 Winchester Magnum, which gives a 26-inch barrel plenty of room to work. You get full magnum velocity, a flat trajectory, and the kind of downrange authority elk and moose hunters count on when the shot presents itself across a drainage.
What Sets the Mountain Ascent Peak Apart
The stock is where the Peak earns its name. It is an H-S Precision design built from fiberglass with carbon fiber and Kevlar, riding on an aluminum bedding block that runs nearly the full length of the stock. That gives the action a rock solid, repeatable foundation, which is a big part of why Kimber backs this rifle with a Sub-MOA guarantee. The drizzle painted finish adds grip when things get wet, and a one-inch recoil pad takes some sting out of the magnum push. At roughly 7 pounds 3 ounces, this is impressively light for a 26-inch barreled .300 Win Mag.
A Kimber Action Built for the Backcountry
The stainless 8400 action uses controlled round feed with a Mauser style claw extractor, so cartridges are captured and guided from the internal 4-round magazine straight into the chamber. That system has been trusted in rough country for over a century for good reason. A spiral fluted bolt body and hollow bolt knob trim weight, the three-position Model 70 style safety lets you cycle the bolt with the trigger locked, and the trigger comes factory set between 3.5 and 4 pounds and is adjustable. Everything wears a KimPro II finish that shrugs off weather.
Ready for Your Muzzle Device of Choice
The match grade stainless barrel is threaded 7/16×28 and ships with a muzzle brake to tame recoil, plus a 5/8×24 adapter so you can run common muzzle devices without hunting down special hardware. The 1:10 twist stabilizes the heavier .30 caliber bullets that make the .300 Win Mag shine at distance. The receiver comes drilled and tapped with no sights, so pick a quality scope, get it zeroed, and this rifle is ready for the mountain.
Key Specifications
- Manufacturer Part Number: 3000927
- UPC: 669278309279
- Model: Mountain Ascent Peak
- Caliber: .300 Winchester Magnum
- Action: Bolt Action, Controlled Round Feed with Mauser Claw Extractor
- Barrel Length: 26", Match Grade, Threaded 7/16×28
- Twist Rate: 1:10 RH
- Capacity: 4+1 (Internal Magazine)
- Stock: H-S Precision Fiberglass/Carbon Fiber/Kevlar with Aluminum Bedding Block
- Barrel/Receiver Material: Stainless Steel, KimPro II Finish
- Trigger: Factory Adjustable, Set at 3.5-4 lbs
- Safety: 3-Position Model 70 Style
- Overall Length: 47.9"
- Weight: Approx. 7 lbs 3 oz
- Length of Pull: 13.75"
- Sights: None, Receiver Drilled and Tapped
What’s Included
- Kimber Mountain Ascent Peak bolt action rifle
- Muzzle brake
- 5/8×24 thread adapter
- Owner's manual
Frequently Asked Questions
How accurate is the Kimber Mountain Ascent Peak?
Kimber backs this rifle with a Sub-MOA guarantee, meaning it is built to shoot under one inch groups at 100 yards with quality ammunition. The match grade chamber, full-length aluminum bedding block, and adjustable trigger all contribute to that consistency. Like any rifle, it will show its best with ammo it likes, so it pays to test a few loads.
Does the Mountain Ascent Peak come with a muzzle brake?
Yes, the 26-inch barrel is threaded 7/16×28 and ships with a muzzle brake installed, which goes a long way toward taming .300 Win Mag recoil in a rifle this light. Kimber also includes a 5/8×24 adapter, so swapping to a common aftermarket muzzle device is simple.
Is this rifle light enough for backcountry hunting?
It runs around 7 pounds 3 ounces bare, which is very respectable for a magnum with a 26-inch barrel. The carbon fiber and Kevlar reinforced H-S Precision stock, spiral fluted bolt, and hollow bolt knob all shave weight where it counts. Add a reasonable scope and you are still carrying a manageable setup on long climbs.
Does the Kimber Mountain Ascent Peak have iron sights or a scope?
No, it ships without sights. The stainless receiver comes drilled and tapped from the factory, so you just need to add bases, rings, and the optic of your choice. Given the reach of the .300 Win Mag, most hunters pair it with a quality variable power scope.




Reviews
There are no reviews yet.