Description
If you've got a Kimber 1911 with an adjustable rear sight and you want to run a red dot without sending your slide off to be milled, this EGW mount is one of the simplest ways to get there. It replaces your existing adjustable rear sight by sliding into the factory dovetail, giving you a stable platform for a reflex optic while keeping your slide completely intact. When you're ready to go back to irons, you just pull the mount and reinstall your rear sight.
This mount fits the Kimber 1911 and Ruger SR1911 models that came with adjustable rear sights for windage and elevation. It's built from 7075 aluminum with a matte black hardcoat finish, so it holds up to real-world handling and keeps a clean look that matches most 1911 slides. The footprint is cut for the Trijicon RMR and SRO, and it also accepts a number of Holosun dots including the 407C and 507C series, plus Swampfox models like the Kingslayer, Liberty, and Justice.
Fitting the EGW Kimber Adjustable Mount
Installation is straightforward if you've done dovetail work before. You remove the old rear sight, slide the EGW mount into the dovetail, snug the set screw, then mount your optic using the included hardware. EGW recommends a drop of blue thread locker on the mounting screws and torquing them to about 15 inch-pounds. A rear sight pusher tool makes the swap a lot easier and is worth having if you plan to do it yourself.
What the EGW RMR Mount Won't Cover
Worth knowing up front: this mount is made for guns with adjustable rear sights, not fixed-sight models, and it's not designed for Kimber's optics ready pistols or the RMRcc. If your Kimber already has a factory optic cut, you don't need this. Trijicon also recommends using a sealing plate under RMR-style optics to keep water out, which is a good habit to build into your install.
Key Specifications
- Manufacturer: Evolution Gun Works (EGW)
- MPN: 49516
- UPC: 841370116577
- Material: 7075 Aluminum
- Finish: Matte Black Hardcoat
- Overall Length: 1.780 in
- Overall Width: 1.1 in
- Mounting Style: Dovetail
- Optic Footprint: Trijicon RMR / SRO
- Fits: Kimber 1911 & Ruger SR1911 with adjustable rear sights
- Compatible Optics: Trijicon RMR/SRO, Holosun 407C/507C, Swampfox Kingslayer/Liberty/Justice
- Color: Black
- Country of Origin: United States
What’s Included
- EGW dovetail sight mount
- (2) 6-32 flat head mounting screws
- (1) 6-32 x 3/16 set screw
Frequently Asked Questions
Will the EGW 49516 mount fit my Kimber 1911?
It's made for Kimber 1911 and Ruger SR1911 models that have adjustable rear sights for windage and elevation. It is not designed for fixed-sight Kimbers, optics ready models, or the RMRcc. If your gun already has a factory optic cut, you won't need this mount.
What optics work with this mount?
The mount uses a Trijicon RMR / SRO footprint, so any optic built on that pattern drops right on. It also accepts Holosun 407C and 507C series dots along with Swampfox Kingslayer, Liberty, and Justice models.
Do I have to modify my slide to use this?
No milling required. The mount replaces your adjustable rear sight in the existing dovetail, so your slide stays untouched. You can remove the mount and reinstall your rear sight whenever you want.
Is the mounting hardware included and how do I install it?
Yes, it comes with two 6-32 flat head screws and one 6-32 x 3/16 set screw. Remove your rear sight, slide the mount into the dovetail, snug the set screw, then attach your optic. EGW suggests a drop of blue thread locker and torquing the screws to around 15 inch-pounds, and a rear sight pusher tool makes the job easier.




Reviews
There are no reviews yet.