$1,050.00
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Most people hang a .30 caliber can on their 6.5 Creedmoor and call it good. The KGM R65T takes a different approach with a dedicated 6.5mm bore, and that tighter exit gives you several extra decibels of suppression compared to running the same rifle with a .30 cal suppressor. If you spend your time behind a Creedmoor, a PRC, or anything else pushing 6.5mm bullets, that difference is worth having, especially on long range days where hearing comfort and spotting your own impacts both matter.
KGM builds these from Grade 5 and Grade 9 titanium, laser-welded together, which is how a 1.75 inch diameter, 7.3 inch can comes in around 13 ounces without the mount. The internal gas flow design routes gases away from the bullet's path, which cuts down on point of impact shift and keeps groups tight. It also reduces flash, tames recoil, and helps manage the gas blowing back at you and your action. The Adjustable Port End Cap lets you tune the external gas flow, so you can bias the can toward maximum recoil control or maximum quiet depending on the job. KGM's suppressors have been picked up by multiple federal law enforcement agencies for precision rifle duty, which says plenty about how they hold up.
This version attaches over a taper-lock muzzle brake with 5/8×24 threads, the standard pattern on most 6.5 Creedmoor and 6.5 PRC barrels. The tapered interface pulls the suppressor into perfect alignment every time you spin it on, so it returns to zero shot after shot and the design also extends the service life of the can. Between the repeatable mount, the tuned gas flow, and titanium built to run tens of thousands of rounds, the R65T in FDE Cerakote is the kind of purchase you make once and stop thinking about. Screw it on, confirm zero, and get back to shooting.
The R65T is rated for any 6.5 caliber cartridge, from mild stuff like 6.5 Grendel and .260 Remington up through 6.5 Creedmoor and even 6.5 PRC. It will also work fine on smaller bores like 6mm or .224 as long as your mount threads match. What it cannot do is pass a .30 caliber bullet, so keep it off your .308 and .300 Win Mag rifles.
The dedicated 6.5mm bore is tighter, which traps gas more efficiently and delivers several additional decibels of suppression on 6.5 caliber rifles compared to the R30T. If you own multiple rifles in different calibers, the R30T is the more flexible pick. If your precision rig is a 6.5 and you want the quietest option, the R65T is the better tool.
That is the whole point of the taper-lock system. The tapered surfaces on the muzzle brake and suppressor wedge together the same way on every install, so alignment is repeatable and point of impact shift stays minimal. It also reduces stress on the can over time, which extends its service life.
The APEC lets you tune how gas vents out the front of the suppressor. Open it up for more of a braking effect and better recoil control, or configure it for maximum sound reduction when quiet is the priority. It is a nice bit of flexibility since a match rifle and a lightweight hunting rig usually want different things from a can.
| UPC | 784668806944 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | RT-R65T-TM-FDE |
| Caliber/Gauge | 6.5MM |
| Thread Pattern | 5/8"x24 |
You must be logged in to post a review.
Reviews
There are no reviews yet.