Description
The KelTec KP50 Braced Pistol is a ground-up redesign of the original P50 platform, not a revision. Where the P50 required opening the action to reload from the top, the KP50 flips the magazine to the bottom with a conventional drop-free well. That change alone transforms the shooting experience. Combined with a fully machined lower receiver, a SU16-derived trigger group with a 6.5 lb pull, AR-style non-reciprocating charging handle, and ambidextrous manual safety, this is a far more refined gun than its predecessor in every practical way. It weighs 4 lbs unloaded, folds to 18.6 inches with the brace stowed, and stretches to 28.3 inches with it deployed.
KP50 Capacity and the Jungle Clip System
This Braced model ships with two 50-round magazines and the Jungle Clip coupler already included. The Jungle Clip locks both mags side by side, so when the first one runs dry, you flip it 180 degrees and reinsert without ever fumbling for a separate mag. That is 100 rounds of 5.7x28mm on the gun, ready to go. The 5.7 cartridge itself is a high-velocity, low-recoil round originally developed for military PDW use, and the KP50's 9.6-inch barrel sits right in the sweet spot for velocity extraction with this caliber.
KP50 Controls, Ergonomics, and Optics Setup
The B5 Systems pistol grip is installed from the factory and is also swappable for any AR-compatible grip if you want to personalize it. The top of the receiver runs a full-length M1913 Picatinny rail for optics, interrupted only at the ejection port, and the rear rail section supports the side-folding brace. There are no sights included, so you will want to run a red dot, which this platform genuinely rewards given the low recoil of the 5.7 cartridge. The barrel is threaded 1/2×28 TPI and ships with an A2-style flash hider installed, so it is suppressor-ready as soon as you swap the muzzle device. Built-in QD sling swivel cups round out a setup that clearly had practical carry and transport in mind.
Key Specifications
- UPC: 640832012286
- MPN: KP50BLKB
- Manufacturer: KelTec
- Model: KP50
- Caliber: 5.7x28mm
- Action: Semi-Auto
- Barrel Length: 9.6"
- Barrel Thread: 1/2×28 TPI
- Capacity: 50+1 (100 rounds with Jungle Clip)
- Weight (Unloaded): 4 lbs
- Overall Length (Folded): 18.6"
- Overall Length (Extended): 28.3"
- Height: 6.5"
- Width: 2.5"
- Trigger Pull: 6.5 lbs
- Twist Rate: 1:7
- Sights: Optics Ready (no sights included)
- Safety: Manual Ambidextrous
- Color/Finish: Black
What’s Included
- KelTec KP50 Braced Pistol
- Side-folding pistol stabilizing brace (factory installed)
- 2x 50-round 5.7x28mm magazines
- Jungle Clip dual-magazine coupler
- A2-style flash hider (installed)
Frequently Asked Questions
Are KP50 magazines compatible with the original KelTec P50?
No, they are not interchangeable. The KP50 uses an entirely new bottom-insert, drop-free magazine design, while the original P50 used a top-loading hinged system. The two platforms have fundamentally different magazine wells, so P50 mags will not work in the KP50 and vice versa.
Does the KP50 Braced come with both magazines and the Jungle Clip already?
Yes. This specific model (KP50BLKB) ships from the factory with two 50-round magazines and the Jungle Clip coupler included. The Jungle Clip connects both magazines side by side for a quick 180-degree flip reload, giving you 100 rounds on the gun without grabbing a spare.
What optic fits the KP50, and do I need any adapters?
The KP50 has a full-length M1913 Picatinny rail running across the top of the receiver, so any standard Picatinny-mount optic will work without adapters. A compact red dot is the most popular choice given the platform's size and the manageable recoil of 5.7x28mm. No sights are included, so plan to add an optic before heading to the range.
Can I run a suppressor on the KP50?
The 9.6-inch barrel is threaded 1/2×28 TPI, which is the standard thread pitch for 5.7x28mm suppressors and most popular muzzle devices. It ships with an A2-style flash hider installed that simply unthreads. Just make sure any suppressor you choose is rated for the 5.7x28mm caliber and verify fit before purchasing.
How does the side-folding brace affect the overall size?
With the brace folded, the KP50 measures 18.6 inches overall, which makes it manageable to store in a range bag or vehicle. Deploy the brace and it extends to 28.3 inches. The brace adds less than a pound to the unloaded weight compared to the base pistol configuration.
What is the trigger like on the KP50?
KelTec uses the fire control group from their proven SU16 platform, which gives the KP50 a consistent 6.5 lb trigger pull. It is not a competition trigger, but it is clean and reliable, and it is a significant step up from what the original P50 offered. The lower receiver is also fully machined rather than polymer-based.





Reviews
There are no reviews yet.