$366.00
66 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Kahr has been building slim, single-stack pistols for a long time, and the CT9 is their take on bringing that same quality DNA to a more accessible price point. It is part of Kahr's CT Value Series, which means you get the same core operating system and fit found on their higher-end T and P series guns, with a few cosmetic differences that keep the cost down without cutting corners on function.
The trigger is the thing people talk about most with Kahr pistols, and rightfully so. The CT9 uses Kahr's trigger-cocking DAO system, which operates more like a smooth, light double-action revolver pull than a typical striker-fired gun. It is a long, deliberate pull with a clean break, which builds in a natural margin of safety without requiring an external manual safety. There is also a passive striker block that prevents the firing pin from moving unless the trigger is fully cycled, so the gun is designed to be carried ready without worry.
The frame is black textured polymer, and the grip texture is well-balanced, firm enough to hold onto under rapid fire but not so aggressive it gets uncomfortable during longer sessions. The matte stainless slide keeps glare down and holds up well to daily wear, and the rear slide serrations give you a solid surface to work with. Sights are a white bar-dot combat configuration, drift-adjustable at the rear and pinned polymer up front, which is a practical setup for defensive use and quick target acquisition.
At 6.5 inches overall with a 0.90-inch slide width, the CT9 is genuinely slim. The 4-inch barrel gives it a bit more to work with in the accuracy department than a lot of carry guns, and the longer grip means a full firing grip for most hand sizes. That combination makes it a solid pick for hip carry or IWB with the right holster, and it doubles as a genuinely enjoyable range gun. It ships with one 8-round stainless steel magazine, so picking up a spare early on is a smart move.
No, the CT9 does not have an external manual safety. It relies on Kahr's passive striker block, which prevents the firing pin from traveling unless the trigger is deliberately pulled through its full stroke. This is a common and trusted setup for carry pistols, and the long DAO trigger pull itself acts as a functional safety margin.
The CT9 uses Kahr's trigger-cocking DAO system, which has a longer, smoother pull that feels closer to a lightweight double-action revolver than most striker-fired guns. It finishes cocking the striker as you pull through, which results in a consistent feel on every shot. People who grew up shooting DA revolvers tend to take to it naturally.
It is a solid option, especially for IWB or hip carry. The single-stack design keeps the slide width to just 0.90 inches, and at 18.5 ounces unloaded it carries comfortably all day. The 4-inch barrel and full-length grip make it a bit taller than subcompact carry guns, so holster selection matters, but that same grip size is part of what makes it comfortable and easy to shoot well.
The CT9 is the larger pistol of the three, with a 4-inch barrel and a grip that accommodates all four fingers for most shooters. The CW9 is slightly smaller and the CM9 is the most compact of the family, with a 3-inch barrel and a grip that may leave your pinky hanging. The CT9 gives up a bit of concealability in exchange for a more comfortable shooting experience and better sight radius.
Like most semi-auto pistols, the CT9 tends to run best after it has had some rounds through it and been properly cleaned and lubricated. Running 150 to 200 rounds of quality factory ammunition through it before relying on it for carry is a reasonable practice. Some owners also find it helpful to pre-load the magazine a day or two ahead of a first range session to help the magazine spring relax slightly.
The CT9 uses Kahr's proprietary single-stack 9mm stainless steel magazines. The gun ships with one 8-round magazine. Kahr-made magazines are plasma welded and use Wolff springs, but the CT9 is also generally compatible with magazines from other guns in Kahr's T and P series 9mm lineup, though it is worth verifying fitment before purchasing aftermarket options.
| UPC | 602686087315 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | CT9093 |
| Action | |
| ATF Type | Pistol |
| Barrel Length | 4" |
| Caliber/Gauge | 9mm |
| Capacity | 8 + 1 |
| Length | 6.6 |
| Number of Magazines | 1 8 rd. |
| Package Height | 5.3 |
| Package Width | 9.25 |
| Product Type | Semi-Auto Pistol |
| Safety | No |
| Shipping Weight | 1.95 |
| Sights | White Bar-dot Combat Sights |
| Sights Type | Adjustable Sights |
| Slide Description | Serrated |
You must be logged in to post a review.
Reviews
There are no reviews yet.