$109.25
11 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Muzzle devices that pull double duty are worth their weight, and the JK Armament Bald Eagle Compensator is a good example of doing two jobs well. First and foremost, it is a compensator that knocks down recoil and muzzle movement so your sight picture settles back on target quicker between shots. Second, it serves as the quick-detach mounting point for any suppressor running JK's Quick Attach Taper Mount system, letting you snap a can on and off in seconds without ever touching the barrel threads again.
The symmetrical port design means there is no timing involved. Thread it on, torque it to the recommended 35 ft/lbs, and you are done. No shims, no crush washers, no fiddling to get ports clocked just right. JK machined wrench flats into both the front and rear of the device, 13/16 inch up front and 3/4 inch in back, so installation and removal are straightforward with basic hand tools. This version is cut for 1/2×28 TPI threads with a .22 caliber bore, which covers most rimfire rifles and pistols along with anything else wearing that common thread pattern in an appropriate bore size.
At just 2.75 ounces and 1.65 inches long, the Bald Eagle adds almost nothing to the end of your barrel. It is machined from heat treated 17-4 stainless steel with a durable black DLC finish, so it shrugs off heat, carbon, and hard use. Here is the clever part: when your JK suppressor is mounted over it, the Bald Eagle functions as the initial blast baffle inside the can. That means the comp takes the brunt of the muzzle blast instead of your suppressor's first baffle, which extends the service life of the can itself.
If you are already in the JK ecosystem, this is the natural host-side mount. And even shot unsuppressed, it is a legit compensator that keeps your rifle flat and quick on follow-ups.
No. The Bald Eagle uses a symmetrical port design, so there is no timing, shimming, or crush washer involved. Just thread it onto your 1/2×28 barrel and torque it to the recommended 35 ft/lbs using the built-in wrench flats. It is one of the simpler muzzle device installs you will run into.
It is the host-side mount for suppressors equipped with JK Armament's Quick Attach Taper Mount system. The suppressor slips over the comp and locks onto the taper for a fast, repeatable attachment. It will not interface with other manufacturers' QD systems, so this one is best for folks running JK cans.
This version has a .22 caliber bore and 1/2×28 threads, which makes it a natural fit for rimfire rifles and pistols along with other hosts in that bore range wearing the same thread pattern. JK offers the Bald Eagle in other thread and bore sizes if your barrel is different. Always match both the thread pitch and bore diameter to your specific firearm.
It does. When a JK taper mount suppressor is attached, the compensator sits inside the can and acts as the initial blast baffle. That means it absorbs the harshest muzzle blast instead of your suppressor's first baffle, which helps extend the working life of the can over thousands of rounds.
| UPC | 850038425579 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | JKMDHDBE28 |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.