0
0

Redding Instant Indicator 257 Roberts Imp 40 (No Dial) 17322

UPC: 611760173226

$112.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you handload 257 Roberts Improved 40 and you're chasing tighter groups, the Redding Instant Indicator takes a lot of the guesswork out of case prep. It's a precision comparator that lets you check headspace from the case shoulder to the base and compare bullet seating depth, both within about a thousandth of an inch. Drop in a fired case, take a reading, then compare it to a sized case so you know exactly how much your full-length die is pushing the shoulder back. That kind of feedback is the difference between brass that fits your chamber just right and brass you're guessing at.

What the 257 Roberts Improved 40 Instant Indicator Does

The tool is built around a die body with sliding shoulder and blank contactors and a pressure spring inside. Setting your sizing die for the exact amount of shoulder bump keeps you from over-working your brass, which means less case stretching, fewer web separations, and more reloads out of every piece. You can also use it to sort cases fired in different rifles, check trim length uniformity, batch brass by shoulder position, and sort bullets. For seating depth checks, you insert a standard Redding neck sizing bushing matched to your bore diameter.

Pairing Your Instant Indicator With a Dial

This is the 17322, which is the version without the dial indicator. If you already own a Redding 1-inch dial (item 17999) or have one kicking around the shop, this is the money-saving route. If you don't, you'll want to grab one to actually read your measurements. The nice touch here is the included Range Adapter, which lets you take comparisons out to the range or into the field without needing a reloading press set up.

One thing worth knowing: the Instant Indicator will work across a family of cartridges that share the same shoulder angle, so it's a little more flexible than the single caliber on the label would suggest. For precision 257 Roberts Improved shooters who take their brass prep seriously, it's a tool that earns its spot on the bench.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 17322
  • UPC: 611760173226
  • Caliber: .257 Roberts Improved 40 degree
  • Tool Type: Headspace and bullet seating depth comparator
  • Measurement Precision: Within .001 inch
  • Dial Indicator: Not included (sold separately, item 17999)
  • Range Adapter: Included
  • Quantity: 1

What’s Included

  • Instant Indicator die body for 257 Roberts Improved 40
  • One bore diameter bushing
  • Surface (blank) contactor
  • Shoulder contactor
  • Headspace gauge
  • Range Adapter
  • Complete instructions

Frequently Asked Questions

Does the 257 Roberts Improved 40 Instant Indicator come with a dial indicator?

No. This is the 17322 model, which is the version without the dial indicator. You'll need a Redding 1-inch dial indicator (item 17999) to take readings, which is sold separately. If you already have one, this is the more economical way to buy.

What does the Redding Instant Indicator actually measure?

It compares headspace from the case shoulder to the base and checks bullet seating depth, both within about a thousandth of an inch. That lets you set your full-length sizing die for the precise amount of shoulder bump and keep your seating depth consistent load to load. It's a go-to tool for verifying your brass fits your chamber correctly.

Can I use this Instant Indicator for cartridges other than 257 Roberts Improved 40?

Yes, within reason. Redding notes the tool can be used on a family of cartridges that share the same shoulder angle. The caliber on the label is what it's set up for, but similar-shouldered rounds can work with the right components.

How does checking shoulder bump help my brass last longer?

When you set your sizing die to bump the shoulder just the right amount instead of over-sizing, you reduce how much the brass stretches and work hardens on each firing. Less working of the brass means fewer case head separations and more reloads out of each piece. The Instant Indicator gives you the measurement feedback to dial that in.

Additional information

UPC

611760173226

Manufacturer

Manufacturer Part Number

17322

Caliber/Gauge

.257 Roberts

Reviews

There are no reviews yet.

Be the first to review “Redding Instant Indicator 257 Roberts Imp 40 (No Dial) 17322”