Inforce WML Gen 3 White/IR Weapon Light 450 Lumens FDE

Description

The Inforce WML Gen 3 in Flat Dark Earth is a compact weapon-mounted light that pulls double duty. On one side you've got 450 lumens of white light throwing a tight 10,000-candela beam, and on the other you've got a 160mW infrared emitter for anyone running night vision. It mounts to any MIL-STD-1913 Picatinny rail with an integrated clamp, so there are no tools needed to get it on your rifle, PCC, or shotgun.

What the Inforce WML Gen 3 Brings to the Rail

The headline here is the beam. That 10,000-candela intensity reaches out to roughly 656 feet, which is more than enough punch for close-quarters work and enough throw to reach mid-range on a rifle. White light runs about 1.5 hours on a single CR123A, and the IR side stretches to around 2.5 hours, so a fresh battery gets you through most nights afield or on the range. Compared to the older WML generations, the Gen 3 nearly doubles the beam intensity without eating into that runtime.

Controls and Build on the WML Gen 3

Inforce ditched the tape switches of older designs in favor of an ergonomic, non-slip button contoured to the shape of your thumb. It's intuitive to run with gloves, and a second switch lets you toggle between white and IR. You get constant, momentary, and strobe modes, plus a flip safety that guards against bumps and accidental activation. A quarter-turn of the head engages lockout mode for transport and storage, which is a nice touch when the light is riding in a bag or safe.

Built to Take a Beating

The housing is molded from glass-reinforced nylon rather than cheap plastic, which keeps it light while shrugging off dirt, sand, and grit. It's waterproof down to 66 feet (20 meters), so rain, mud, and the occasional dunk aren't going to slow it down. Inforce backs it with a limited lifetime warranty to the original owner, and these lights are engineered and assembled in the USA.