$679.00
Out of stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Anyone who has run a traditional 9mm can on a pistol or a blowback PCC knows the drill: gas in the face, a dirty gun after one range trip, and a slide that suddenly cycles like it's angry at you. The Flow 9K Ti was built to fix all of that. HUXWRX's hybridized Flow-Through technology routes combustion gases forward and out the front instead of dumping them back into the action, so your gun stays cleaner, your optic window stays clearer, and you're not blinking through blowback between strings.
This is HUXWRX's first fully 3D-printed pistol suppressor, DMLS printed from Grade 5 titanium as essentially one solid piece. That process allows internal geometry a machined can simply can't match, and it keeps the weight at a remarkable 4.8 ounces bare. At 5.33 inches long and 1.47 inches in diameter, it barely changes how a handgun balances, which matters a lot more than spec sheets suggest when you're actually shooting. The C-Series high temperature Cerakote Black finish shrugs off heat and hard use, and the enhanced GeoFlash cap with extended lugs makes mounting and removal quick without hunting for tools.
The caliber rating here is impressively broad: 9mm, .22 LR, .17 HMR, 5.7×28, .350 Legend, and .300 Blackout in both subsonic and supersonic loads, all with no barrel length restrictions. It's also full-auto rated. The industry-standard 1.375×24 HUB rear interface opens the door to 3-lug, quick detach, and direct thread mounts, and it ships with a 1/2×28 booster assembly plus a HUB piston housing adapter, so tilting-barrel handguns are covered from day one. If you want it on a fixed-barrel PCC, swap the booster spring for a fixed barrel spacer and you're set.
As a successor to the well-regarded RAD 9, the Flow 9K Ti is lighter, quieter, and more efficient than the can it replaces. For anyone running a suppressed Glock, MPX, or dedicated 300 BLK setup who's tired of getting gassed out, this one earns its spot in the safe.
Yes, as long as your handgun has a 1/2×28 threaded barrel, which covers most threaded 9mm pistols. It ships with a booster assembly and 1/2×28 piston already set up for tilting-barrel guns like Glocks and M&Ps, so the barrel can cycle normally under the added weight. If your barrel has a different thread pitch, pistons in other patterns are available separately.
You can, and it's a favorite for that exact job. For fixed-barrel guns like most pistol-caliber carbines, you'll want to swap the booster spring for a fixed barrel spacer, which is sold separately. The 1.375×24 HUB interface also accepts 3-lug, quick detach, and direct thread mounts if you prefer a QD setup on your carbine.
It does, and it's the main reason people buy this can. Instead of trapping gas and pushing it back through the action like a conventional baffle design, the Flow 9K Ti vents gas forward and out the front. That means less debris in your face, a cleaner gun and optic, and no need to modify your gas system or tune your host to run suppressed.
It's rated for 9mm, .22 LR, .17 HMR, 5.7×28, .350 Legend, and .300 Blackout in both subsonic and supersonic loads, with no barrel length restrictions. Handling supersonic 300 BLK is rare for a titanium pistol-sized can, which makes this one of the more versatile suppressors in its class. It's also full-auto rated.
| UPC | 810176430149 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 2949 |
| ATF Type | Silencer |
| Caliber/Gauge | 9mm |
| Color | Black |
| Length | 5.8700 |
| Model | |
| Product Type | Suppressor |
| Shipping Weight | 1.0 |
| Thread Pattern | 1/2×28 |
| Style | Direct Thread |
You must be logged in to post a review.
Reviews
There are no reviews yet.