$1,111.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The 7mm-08 Remington has earned its reputation as one of the most efficient and accurate short-action cartridges out there, and good brass is where every accurate load starts. This Hornady unprimed brass gives you a clean, uniform case to build on, whether you're loading for deer season, target work, or dialing in a sub-MOA hunting rig. These cases ship unprimed and empty, so you have full control over primer, powder, and bullet selection.
Hornady runs smaller lot production to hold tighter quality standards, and it shows in the finished case. Each one is measured for consistently tight wall concentricity, and cases are run through a pressure calibration test to promote uniform expansion when fired. You also get uniform case wall thickness along with consistent weight and internal capacity, which is exactly what you want when you're chasing repeatable velocities and low extreme spreads across a string.
The 7mm-08 is based on the .308 Winchester necked down to 7mm, with a case length right around 2.035 inches and a 20 degree shoulder that feeds smoothly in short actions. It uses a large rifle primer and holds somewhere in the range of 52 to 55 grains of water capacity depending on the brand, which pairs nicely with medium burning rifle powders. These cases accept standard 7mm-08 dies and work with the full spread of .284 diameter bullets, from lighter 120 grain pills up through the popular 139 and 140 grain hunting and match bullets.
One of the real advantages of starting with quality brass is longevity. Reloaders consistently report getting more reloads per case out of Hornady brass compared to cheaper options, and the tight primer pockets and uniform necks hold up well across repeated firings and resizing. Made in the USA, this is a dependable base for anyone who wants their handloads to shoot the same today as they did last season.
No. These cases ship new and unprimed, with no powder, primer, or bullet installed. That gives you full control to select your own primers, powder charge, and projectiles when building your loads.
The 7mm-08 Remington uses a large rifle primer. The standard large rifle primer handles the cartridge's efficient powder column well, so you don't need magnum primers for typical loads.
Yes. This brass is made to standard 7mm-08 Remington dimensions, so it works with any standard 7mm-08 reloading die set. It accepts the full range of .284 diameter 7mm bullets, from light 120 grain options up through 139, 140, and heavier hunting and match bullets.
Hornady runs smaller production lots and measures for tight wall concentricity, uniform wall thickness, and consistent weight and capacity. Cases are also pressure calibration tested for uniform expansion. Reloaders tend to get more reloads per case and more consistent velocities compared to commodity brass.
| UPC | 090255600728 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 8646B |
| Shipping Weight | 46.545 |
You must be logged in to post a review.
Reviews
There are no reviews yet.