Description
If you handload the .300 Winchester Magnum, you already know your brass is where accuracy starts. Hornady's unprimed .300 Win Mag cases give you a proven, uniform platform to build on, made with the same attention to detail that goes into their loaded ammunition. These arrive new and unprimed with a large rifle primer pocket, ready for your own powder, primer, and bullet recipe.
What sets this brass apart is the care taken during production. Hornady runs their cases in smaller lots to hold tighter tolerances, which translates to uniform wall thickness, consistent case weight, and predictable internal capacity from piece to piece. That consistency is exactly what you want when you are chasing tight groups at distance, since case-to-case variation is one of the quiet things that opens up your spread downrange.
Why This Hornady .300 Win Mag Brass Earns a Spot on the Bench
Every case is measured for tight wall concentricity, which helps the bullet seat straight and chamber square. Hornady also puts their cases through a pressure calibration test to confirm uniform expansion when fired, then hand inspects them before packaging. The payoff for you is cleaner, more repeatable ignition and velocities that hold steady across a string.
Getting the Most From Your Hornady Unprimed Cases
Brass this good rewards good prep. Plan on your normal routine of checking case length, chamfering and deburring, and uniforming the primer pocket before that first load. Because Hornady holds consistent capacity, you will spend less time sorting by weight and more time at the bench actually loading. These cases also tend to deliver more reloads over their life when you keep an eye on your sizing and trim schedule, which stretches your component dollar on a magnum case that is not cheap to feed.
Whether you are loading for a long-range hunting rig or a precision bolt gun, this is dependable, no-drama brass that gives you a clean starting point and plenty of room to tune your load.
Key Specifications
- Manufacturer: Hornady
- Caliber: .300 Winchester Magnum
- Type: Unprimed Brass Cartridge Cases
- Condition: New
- Case Material: Brass
- Primed: No
- Primer Pocket: Large Rifle
- Manufacturer Part Number: 8670B
- UPC: 090255600308
What’s Included
- Hornady unprimed .300 Winchester Magnum brass cases
Frequently Asked Questions
Is this Hornady .300 Win Mag brass new or once-fired?
This is brand new, factory-fresh unprimed brass, not once-fired or reconditioned. Each case is hand inspected before packaging, so you are starting your load workup on a clean, uniform foundation.
Does this brass come primed?
No, these cases are unprimed, which gives you full control over your primer choice. The .300 Win Mag uses a large rifle primer pocket, so you will want large rifle primers to match.
Do I need to prep the Hornady brass before loading?
As with any new rifle brass, a quick prep pass is smart before that first firing. Check case length and trim if needed, chamfer and deburr the case mouth, and run a quick pass on the primer pocket. Hornady holds consistent weight and capacity, so you will typically spend less time sorting.
What is the primer pocket size for .300 Win Mag?
The .300 Winchester Magnum uses a large rifle primer pocket. Make sure you are stocked with large rifle primers before you sit down to load these cases.





Reviews
There are no reviews yet.