Description
The Hornady Match Grade Neck Size Die for .308 Win is built for handloaders chasing tighter groups out of a bolt gun. Instead of squeezing the whole case back down to minimum spec every time, it works only the neck and bumps the shoulder, which keeps your brass fit to your chamber and stretches case life. The result is better bullet-to-bore alignment and the kind of repeatable neck tension that shows up on paper.
What Makes the Match Grade Neck Size Die Tick
The heart of this die is its interchangeable, self-centering neck sizing bushing. You pick the bushing that matches the neck tension you want, which means you are never forced to over-work the brass the way a standard die can. Hornady bushings come in tight increments so you can fine-tune the fit to your specific brass and chamber. There is also a self-centering decap spindle with an o-ring tensioner and Hornady's elliptical expander ball with a headed decap pin, the same pin found in their Custom Grade dies. That elliptical expander glides through the neck with less friction and less stretch, which is a nice touch when you are running a lot of cases.
Picking the Right Bushing for Your .308 Win Die
Keep in mind the bushing is sold separately and is required to size the neck. A good starting point is to measure the neck diameter of a loaded round and subtract a few thousandths to land on your bushing size. One of the handy things about this die is that it accepts RCBS, Redding, and Wilson bushings in addition to Hornady's own, so if you already have a stash of bushings on the bench, odds are they will drop right in.
Neck sizing like this is meant for bolt-action rifle cases. Semi-autos, lever guns, and pump actions generally want full-length sizing to feed reliably, so this one is aimed squarely at the precision bolt-gun crowd. Before the first run, give the die a quick cleaning to pull off the factory rust preventative, then thread it down in quarter-turn steps until the neck sizes cleanly.
Key Specifications
- Cartridge: .308 Winchester
- Die Style: Neck Sizing Die (bushing type)
- Bushing: Sold separately, required for neck sizing
- Bushing Compatibility: Accepts Hornady, RCBS, Redding, and Wilson bushings
- Expander: Elliptical expander ball with headed decap pin
- Spindle: Self-centering decap spindle with o-ring tensioner
- Intended Use: Bolt-action rifle cases
- Manufacturer: Hornady
- Manufacturer Part Number: 544357
- UPC: 090255543575
- Warranty: Lifetime
- Country of Origin: United States
What’s Included
- Match Grade Neck Size Die, .308 Win
- Self-centering decap/expander spindle assembly
- Lock ring
Frequently Asked Questions
Does the Hornady Match Grade Neck Size Die come with a bushing?
No, the neck sizing bushing is sold separately and is required to actually size the case neck. You choose the bushing size based on the neck tension you want, which lets you avoid over-working your brass. A common method is to measure the neck of a loaded round and subtract a couple thousandths to find your starting size.
Will Redding, RCBS, or Wilson bushings fit this die?
Yes. The Hornady Match Grade dies are built to accept bushings from Hornady, RCBS, Redding, and Wilson, so you are not locked into one brand. If you already have bushings on your bench, there is a good chance they will work in this die.
Can I use this Match Grade Neck Size Die for AR-10 or semi-auto .308 loads?
Neck sizing is intended for bolt-action rifle cases. Semi-autos, lever guns, and pump actions typically need full-length resizing to feed and chamber reliably, so for those you would want a full-length die instead. This die is best suited for precision bolt-gun handloading.
What does neck sizing do that a standard full-length die doesn't?
Neck sizing only resizes the case neck and bumps the shoulder rather than squeezing the entire case body back to minimum spec. That keeps the brass fit to your chamber, reduces how hard the metal is worked, and generally extends case life. The payoff is better bullet alignment with the bore and more consistent accuracy.




Reviews
There are no reviews yet.